Odroid HC4 - Amlogic S905X3 Quad-Core 1,8GHz + 4GB RAM
- Артикул:
- 47769543
Характеристики
- UC - USB
- 1x USB
- UC - UART
- yes
- UC - HDMI
- yes
- UC - ядро
- Cortex A55
- UC - Linux
- yes
- UC - Разъем
- 5V - DC 5.5/2.1mm
- UC - Windows
- Нет
- UC - Android
- yes
- UC - частота
- 1.8 GHz
- UC - Ethernet
- yes
- Интерфейс UC - LCD
- Нет
- Интерфейс UC - SPI
- Нет
- UC - Внешняя память
- microSD card
Общие характеристики
- UC - I2C
- Нет
- UC - microSD
- yes
- UC - Микроконтроллер
- Amlogic S905X3
- Интерфейс UC - камеры
- Нет
- UC - Цифровые контакты
- 5
- UC - оперативная память
- 4 GB
Прочие свойства
- Бренд
- ODROID
Описание
The Odroid HC4 minicomputer is based on the same processor as Odroid C4 -Amlogic S905X3 Quad-CorewithARM Cortex A55core at 1.8 GHz. The device is equipped with4 GB of RAM, Mali-G31 graphics, microSD card slot, two SATA connectors, HDMI, USB connector and Gigabit Ethernet port. The HC4 was created with the vision of creating high-performance NAS / Home Cloud servers. The minicomputer is enclosed ina transparent housingwith access to all ports of the device.
Odroid HC4 allows you to connect two 3.5" HDDs, two SSDs or 2.5" HDDs, as well as one 3.5" HDD and one 2.5" SSD.
Odroid HC4 Minicomputer with HDDs connected.
The kit does not include drives and OLED display.
Odroid HC4.
Also availablewith OLED display.
What do I need to run my Odroid HC4 minicomputer?- MicroSD memory card- a memory carrier on which the operating system will be installed.
- Power supply 15 V / 4 A- minicomputer equipped with 5.5 / 2.1 mm DC socket.
- HDMI cable- to connect the device with a monitor or other display.
- Mouse and keyboard- to navigate the system interface and enter data.
The Odroid HC4 Minicomputer has a function to boot from the hard drive via the SATA port whena microSD cardis not inserted. It works with Linux Debian / Ubuntu and other Linux systems with kernel 4.9.230 or higher, and Mainline with kernel 5.8 or higher.
Quad-Core 64-bit
ARM Cortex A55
Graphics Nali-G31 MP2 SystemsUbuntu / Debian
Android Pie
Clocking 1.8 GHz Architecture ARMv8-A Memory RAM 4 GB DDR4 MemorymicroSD card
SATA for two 2.5" / 3.5" drives
GPIO socket 5-pin connector for OLED display Power supply15 V / 4 A
DC Jack 5.5 / 2.1 mm
Dimensions of the tiles 90,5 x 84 x 25 mm Interface USB Host USB 2.0 socket type A USB OTG - Network interface 10/100/1000 Mbps Ethernet RTC system - Video HDMI 2.0 Audio HDMI ADC transmitter - Communication UART, GPIO- Producer Hardkernel website
- Product wiki page
