Характеристики
- UC - I2C
- yes
- UC - USB
- 5x USB
- UC - ядро
- 4. Quad Core, Cortex A55
- UC - UART
- yes
- UC - HDMI
- yes
- UC - Linux
- yes
- UC - Разъем
- 5V - DC 5.5/2.1mm
- UC - microSD
- yes
- UC - Windows
- Нет
- UC - частота
- 2.0 GHz
- UC - Ethernet
- yes
- Интерфейс UC - SPI
- yes
- UC - Внешняя память
- microSD card
- UC - Цифровые контакты
- 40
- UC - оперативная память
- 4 GB
Общие характеристики
- UC - Android
- yes
- Интерфейс UC - LCD
- Нет
- UC - Микроконтроллер
- Amlogic S905X3
- Интерфейс UC - камеры
- Нет
Прочие свойства
- Бренд
- ODROID
Описание
Odroidsingle disc computer in C4 versionequipped withSoC Amlogic S905X3 quad-corewith2.0 GHz Cortex-A55processor. The board has 4 GB of DDR4 RAM memory, on the board there are Ethernet Gigabit port, HDMI 2.0 4K/60Hz port, four USB 3.0 ports and one microUSB 2.0, 40-pin GPIO, connectors for microSD card and eMMC and IR receiver. Works with Ubuntu20.04 orAndroid Pie 9.0 systems.
The board has a 40-pin GPIO connector.
What is required to start working with a Odroid C4 minicomputer?- MicroSD memory card or eMMC memory- the medium on which the operating system will be installed
- 12 V / 2 A power supply unit- to power a minicomputer
- HDMI cable- to connect the device to a monitor or display
- Mouse and keyboard- to navigate the system and enter data
Operating systems recommended for Odroid C4 are Linux Ubuntu 20.04 and Android Pie 9.0. As with other minicomputers, we use a microSD card or eMMC as a memory carrier.
Ubuntu and Android systems can be downloaded frommanufacturer's website.
Installation of the system is very easy - checkour manual!
The board has 4 USB 3.0 ports and 1 microUSB 2.0 OTG port.
Communication with the minicomputerOdroid for communication uses well-known and used in many devices interfaces:
- Five USB connectors - oneof the most popular connectors used in electronics, the USB connectors allow you to connect peripheral devices such as a mouse, keyboardand WiFi network card. The number of USB ports can be further expanded by using USB Hubs.
- Ethernet socket- using the Ethernet socket, we can connect a minicomputer directly to the network.
- 40-pin GPIO connector- output/input connectors that can be used to connect LEDs, buttons, motor controllers. Among them there are pins supporting interfaces: I2C, SPI and UART.
- microSD slot and eMMC card slot- connectors for communication with storage media.
To power the system usesDC Jackconnector, the manufacturer recommends that the voltage given to the connector should be 5.0 V, the current capacity of such a power supply should be at least 2.0 A.
A suitable heatsink has also been attached to the minicomputer, thanks to which the temperature generated by the minicomputer is efficiently drained from the system.
Specification and comparison Basic information Model Odroid C0 Odroid C1+ Odroid C2 Odroid C4 Specification Processor Amlogic S805 Amlogic S805 Amlogic S905 Amlogic S905X3 CoreQuad-Core 32-bit
ARM Cortex A5
Quad-Core 32-bit
ARM Cortex A5
Quad-Core 64-bit
ARM Cortex A53
Quad-Core 64-bit
ARM Cortex-A55
GraphicsARM Mali 450MP
ARM Mali 450MP
ARM Mali 450MP
ARM Mali-G31 MP2
SystemsUbuntu 14.04
Android 4.4
Ubuntu 14.04
Android 4.4
Ubuntu 16.04
Android 5.1
Ubuntu 20.04
Android 9.0
Clocking 1.5 GHz 1.5 GHz 1.5 GHz 2.0 GHz Architecture ARMv7 ARMv7 ARMv8ARMv8-A
Memory RAM1 GB DDR3
1 GB DDR3
2 GB DDR3
4 GB DDR4
MemorymicroSD card
UHS1
eMMC 4.5 HS200
microSD card
UHS1 to 16 GB
eMMC 4.5
microSD card
UHS1 to 128 GB
eMMC 5.0
microSD card
UHS1 to 64 GB
eMMC 5.0 GPIO socket40-pin + 7-pin connector
(to be soldered)
40-pin + 7-pin connector
40-pin + 7-pin connector
40-pin + 7-pin connector
Power supply5 V / 2 A
DC Jack
5 V / 2 A
DC Jack
5 V / 2 A
DC Jack
12 V / 2 A
DC Jack 5.5 x 2.1mm
Dimensions of the tiles 58 x 56 x 11 mm 85 x 56 x 18 mm 85 x 56 x 18 mm 85 x 56 x 11 mm Interfaces USB Host2 x USB 2.0
(option
to be soldered in)
4x USB 2.0
socket type A
4x USB 2.0
socket type A
4x USB 3.0
socket type A
USB OTG -1x microUSB
1x microUSB 1x microUSB 2.0 Network interface -Ethernet
10/100/1000
Mbit/s
Ethernet
10/100/1000
Mbit/s
Ethernet
10/100/1000
Mbit/s
RTC system Built-in Built-in - - Video HDMI HDMI HDMI 2.0 4K/60Hz HDMI 2.0/60Hz AudioHDMI / I2S
HDMi
HDMI / I2S
HDMI / S/PDIF/ I2S ADC transmitter2 channels
10-bit2 channels
10-bit2 channels
10-bit
2 channels
12-bit
CommunicationUART, SLEEPING, I2C,
GPIO, ADC
UART, SLEEPING, I2C,
GPIO, ADC
UART, SLEEPING, I2C,
GPIO, ADC
UART, SLEEPING, I2C,
GPIO, ADC
Useful links- Producer Hardkernel website
- Product wiki page
- Downloadable operating system
- System Installation Guide