Module with USB type C socket - connector for PCB - Pololu 3411
- Артикул:
- 47398733
Характеристики
- Conn - Стандартный
- мужчина
Общие характеристики
- Вести
- 8
Прочие свойства
- Бренд
- Pololu
Свойства
- Растр
- 2.54 mm
Описание
Module with USB type C socket, which allows to connect the USB leads from the cable with USB-C plug to the PCB or connect them using wires. Leads are standard goldpin 2,54 mm. The dimensions of the module are: 20 x 15 x 5 mm.
The 24-pins in the USB-C connector make it difficult to use in prototyping projects. The board facilitates access to 8 pins placed in one line with a 2.54 mm raster. The module comes with a goldpin strip for self-soldering. The board can be used as power source or can be used to draw power, depending on CC configuration pins.
Module with USB type C socket - connector to contact board.
Pins can be seen on the back side of the board.
The board does not work with USB 3.1 (no Tx and Rx pins). It works only with slower USB 2.0 standard.
- VBUS - power supply
- GND - system ground
- D+ and D- - differential lines for USB data transmission
- CC 1 and 2 - configuration pins
- SBU 1 and 2 - additional pins
- Manufacturer's website: Pololu #3411
- USB-C specification