LSM6DSO - 3-axis accelerometer and I2C/SPI gyroscope - SparkFun SEN-18020

Бестселлер
43302499
9 162 AMD
  • Бренд SparkFun
  • Доставка из Польши
  • Курьер DHL 30 мая
  • Стоимость доставки заказа в Армению от 84 890 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Прочие свойства

Бренд
SparkFun

Описание

Product description: LSM6DSO - I2C/SPI 3-axis accelerometer and gyroscope - SparkFun SEN-18020

A 6DoFLSM6DSOchip board containingan accelerometerandgyroscopealong with a 9 kB FIFO buffer and embedded processing interrupt functions. The device can detect shock, roll, motion, touch, count steps, and read temperature. The LSM6DSO is capable of reading accelerometer and gyroscope data at speeds up to 6.66 kHz. The module is equipped with anI2C and SPIcommunication interface. Built-in two Qwiic connectors allow easy connection to the main module via I2C interface. The module operates at3.3 V.

Module with 6DoF LSM6DSO chip.
LSM6DSO main features
  • Accelerometer data reading at 6.66 kilosamples/sec.
  • Reads gyroscope data at 6.66 kilosamples/sec.
  • Draws 0.55 mA for modes up to 6.66 kilosamples/sec.
  • Temperature readout.
  • Buffer up to 9 kB of data between readings (built-in FIFO).
  • Step counter (pedometer).
  • Shock, tilt, motion, tap, double tap detection.
  • Host other sensors to its FIFO.
  • Triggering of interrupt pins by built-in functions or by low capacity/filled FIFO warning.
6DoF module pinouts

The 6DoF LSM6DSO chip module is equipped with two Qwiic connectors for simple connection to the main module using the I2C interface. On the board there are also holes for soldering goldpin strip or wires with 2.54 mm pitch, where pins for power supply and I2C and SPI interfaces are located. The board operates with 3.3 V, to use 5 V boards you need to use logic voltage converter 5 V3.3 V.

Pinouts of 6 DoF module.
Pin Description GND System ground 3V3 Supply voltage 3,3 V SDA I2C interface data line SCL I2C / SPI interface clock line SDO MISO data output of SPI interface CS Chip Select pin INT2 External interrupts INT1 External interrupts OCS Select aux circuit SCX Serial clock aux SDIX Serial interface data input aux SDOX Serial interface data output aux SDI MOSI data input SPI interface
6DoF LSM6DSO module.
LSM6DSO module specification
  • 2x Qwiic connector
  • I2C address: 0x6B (default), 0x6A
  • Accelerometer reading range: ± 2 / ± 4 / ± 8 / ± 16 g full scale
  • Gyroscope reading range: ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 dps full scale
  • Built-in temperature sensor: 16-bit
  • Operating voltage: 1.71 V to 3.6 V (3.3 V for Qwiic)
  • Current consumption at 1.8 V:
    • 0.55 mA in combo high performance mode
    • 0.265 mA in low power combo mode
  • "Always on" with low current consumption for accelerometer and gyroscope
  • I2C / SPI interface
  • Smart FIFO up to 9 kB
  • Operating temperature: from -40°C to 85°C
  • Board dimensions: 25.4 x 25.4 mm
Useful links
  • Manufacturer's website: SparkFun SEN-18020
  • User guide
  • Schematic diagram
  • Eagle program files
  • PCB dimensions
  • LSM6DSO documentation
  • Datasheet
  • Arduino library
  • GitHub repository