LS2 FF805 Thunder full face helmet

All the emotion contained in one fibre. Lightness, resistance and insulation for the race. The safe path that crosses the air talking to the earth Features: - CARBON: LS2 uses multiple layers of our exclusive wide-weave carbon fiber for a very light, but strong shell that handles impacts while dispersing energy for a safer ride. - 3 Shells - 1280 ±50 - Long Oval VISOR features: - LS2 visors are built with 3D Optically Correct ´´A Class´´ Polycarbonate, a space-age polymer with high resistance to impact, that avoids distortion and offers maximum clarity. - UV Resistant: Treatment of the visor with UV-free clear coating. - Ready for Tear OFF - Pinlock Max Vision Ready - Quick Release System COMFORT to wear many miles: - Chin Curtain - Liner Washable - Breathable - Hypoallergenic: We use hypoallergenic technical fabrics that wick moisture to help keep you cool while you ride. - Laser-Cut Foam: Multi-density foam is cut using LS2´s 3D Laser Technology and formed to fit the curves of the rider´s face for a perfect fit with no hot spots. SECURITY system - To ensure good protection the helmet must fit your head to perfection, special attention should be paid to the shell shape design and materials to minimize the effects of a possible impact. It is key to obtain a perfect fit to your head from outside to inside, as well as the shell, the setting of the EPS liner, which should match closely the human head shape. - Safety Reflectives Patches: To increase rider safety at night or in low visibility conditions the neck roll has a reflective safety patch that glows in the light of other vehicle´s headlights. - Double D Ring: This model uses a classic double D­‐ring buckle system for a secure fit. Slide the strap through BOTH D­‐rings, and then wrap it over the first and through the second. Pull the strap until you have a snug fit that won´t roll off. - Emergency Release System: Our emergency release system allows emergency responders to remove the cheek pads from the helmet, allowing extra space to remove the helmet with minimal movement of a fallen rider´s head and neck. It is best to have someone hold the helmet to keep it from moving as you remove the pads. Slide your finger into the red loop and pull carefully, slipping the pads free. Slide the cheek pads over the straps and pull them away from the helmet. - Reinforced Chin Strap - Multi-Density EPS VENTILATION system: - Top Vents - Front Vent - Exhaust Ports - Channeled EPS - Breath Deflector: LS2 Helmets are equipped with a breath deflector to help minimize fogging when the visor is closed and allow the rider to breathe more comfortably when the visor is open.