Li-Pol / Li-Fe/Li-HV/Ni-MH Charger SkyRC E450

SkyRC E450 simple charger with balancer. Device is powered by 230 V, 50 Hz mains voltage, so it does not require an additional power supply. Compatible with LiPol, LiHV, LiFe batteries from 2S to 4S (7.8 V to 14.8 V) and NiMH batteries from 6S to 8S. Batteries are connected via the balancer connector. The charger has a maximum power of 50 W and the ability to select the charging current depending on the capacity of the pack.

• SkyRC E450 charger
• Power cable 230 V
• Cable with banana plugs and XT60 socket

• Supply voltage: from 110 V to 240 V AC 50 Hz
• Charging current: 1 A / 2 A / 3 A / 4 A selectable by switch
• Supported packs: 2-4 cell LiPo, LiFe, LiHV and 6-8 cell NiMH
• Charging sockets:
  • 2, 3 and 4 cell balancer service plug,
  • XT60 standard: Gens Ace, Haiyin, Kypom, E_Sky, 3E Model, Redox, Align, Turnigy
• Dimensions: 111 x 70 x 41 mm
• Weight: 220 g

We offer a high class charger model SkyRC. The device is able to safely charge lithium-polymer, lithium-iron-phosphate and nickel-hydrogen cells.

During a single charge 6 to 8 features can be connected to the device simultaneously. The charger has a built-in balancer, so each cell will eventually be charged to the same degree. This will ensure that the entire battery lasts longer and can operate without being damaged.

The device is called a modeling charger because it is great for charging batteries often made in modeling.

There are two switches on the device. With one you can set the selected current with which the battery is to be charged (from 2 A to 4 A), while with the other you can set the type of battery being charged - Ni-MH, Li-Fe, Li-Pol, and LiHV.