LattePanda V1 2GB RAM + 32GB EEMC Intel Quad-Core WiFi

Бестселлер
99446861
-15%
72 501 AMD
Старая цена 85 212 AMD
  • Бренд LattePanda
  • Доставка из Польши
  • Курьер DHL 30 мая
  • Стоимость доставки заказа в Армению от 72 145 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

UC - I2C
yes
UC - ядро
4. Quad Core
UC - WiFi
yes
UC - UART
yes
UC - HDMI
yes
UC - Разъем
5V microUSB
UC - Android
Нет
UC - Ethernet
yes
UC - Bluetooth
yes
Интерфейс UC - SPI
yes
Интерфейс UC - LCD
yes
UC - Цифровые контакты
40

Общие характеристики

UC - USB
3x USB
UC - Linux
Нет
UC - частота
1.8 GHz
UC - Windows
yes
UC - Внешняя память
eMMC 32GB
UC - Микроконтроллер
Z8300
Интерфейс UC - камеры
Нет
UC - оперативная память
2 GB

Прочие свойства

Бренд
LattePanda

Описание

Description

Minicomputer equipped with processor Intel Cherry Trail Z8350 Quad Core 1.92 GHz. In addition, it has 2 GB of RAM and 32 GB of internal memory EMMC,wi-fi and Bluetooth 4.0, 2x USB 2.0, 1x USB 3.0, microSD slot, Ethernet port. In addition, Panda features microcontroller ATmega32u4 known from Arduino Leonardo which controls 20 GPIO pins. This combination allows the direct programming of the embedded Leonardo of Windows 10 via the serial interface.

 

 

This version has installed system Windows 10, however, the key (license) must be purchased separately. In our offer, you will find alsoLattePanda with license Windows 10!

 

What it takes to run LattePanda?
  • Adapter microUSB - with load current of at least 2 A, for example:power supplies designed for Raspberry Pi.
  • HDMI cable- to connect the device to the monitor.
  • Mouse and keyboard - for control and input data into the device.

 

First run

Start of LattePanda is very easy, for enjoying the OS from desktop Windows 10, you only have to:

  1. Connect the power adapter with microUSB plug with performance above 2 A - for example,the power supply for the Raspberry Pi.
  2. The led, located under the device, should illuminate red.
  3. Then just press and hold the Power button (the first one next to the Ethernet slot) for approx. 1 sec.
  4. Minicomputer will start by showing on the screen the logo LattePanda.
  5. Now it only remains to configure the Windows 10 in the same way as, for example, when buying a new laptop.

 

LattePanda also has connectors formodules and sensors from the DFRobot Gravity.

 

Operating system

The disk of LattePanda is internal memory EMMC. Windows 10 operating system is already installed by the manufacturer, however, the key (license) must be purchased separately. In our offer, you will find alsoLattePanda with license for Windows 10!

 

The picture and sound

LattePanda has aHDMI connector, through which you can pass both picture and sound.

 

In our offer you will find also:display IPS 7"anda touchpadfor LattePanda.

 

Power

As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage had value of 5 V and the current must be not less than 2.0 A. This condition is satisfied by the power supplies for the Raspberry Pi minicomputer 3B and 2B.

 

Minicomputer LattePanda - top view.

 

Communication

LattePanda has basic communication interfaces that can be found in office computers of PC class. In addition to the previously listed connectors audio and video, the user has at his or her disposal:

  • three connectors: USB 2x USB 2.0 + 1x USB 3.0 - to which can be connected, for example, a mouse, keyboard or USB flash drive. If you find that the slots are too short, you can increase their number usingan external USB HUB.
  • Ethernet slot, that is the ability to directly connect to the LOCAL network
  • the wi-fi module - allows for communication with wireless network 802.11 b g n
  • Bluetooth 4.0- secure data transmission through the popular interface
  • GPIO- outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of engines. 20 are managed via the coprocessor Atmega32u4 known from boardArduino Leonardo.

 

Distribution of connectors from minicomputer LattePanda.

 

Compatible with Arduino

Minicomputer has additional microcontroller Atmega32u4 - known from boardArduino Leonardo. This system contros 20 digital outputs and interfaces designed to communicate with modules and sensors like: UART, I2C, SPI. In addition, the manufacturer installed several connectors formodules of the series DFRobot Gravity.

 

Check out how to use LattePanda as Arduino!

In our offer, you will finda special starter kitwith sensors and modules for LattePanda

Specifications and comparison with Rasberry Pi 3 Basic information   Model LattePanda V1 2GB LattePanda V1 4GB Raspberry Pi 3 B Technical specification  Processor chipset

Intel Cherry

Trail Z8350

Intel Cherry

Trail Z8350

Broadcom

BCM2837 64-bit

The number of cores 4 (Quad Core) 4 (Quad Core)

4 (Quad-Core)

ARM Cortex

Operating systems

Windows10 with license

Windows10 without a license

Windows10 without a license

Linux Raspbian

Windows 10 loT

Clock frequency 1.92 GHz 1.92 GHz 1.2 GHz RAM 2 GB DDR3L 4 GB DDR3L

1 GB LPDDR2

Memory

32GB EMMC

(built-in)

64 GB EMMC

(built-in)

microSD card Coprocessor

Atmega32u4

in accordance with

Arduino Leonardo

supports GPIO

Atmega32u4

in accordance with

Arduino Leonardo

supports GPIO

-

Graphics

Intel HD Graphics

200 MHz (500 MHz)

1920x1080px

Intel HD Graphics

200 MHz (500 MHz)

1920x1080px

VideoCore IV

3D graphics core

GPIO slot
  • Connector 2x10 pinfemale
  • GPIO connector Intel
  • Connectors forsensorsfrom the Gravity series
  • Connector 2x10 pinfemale
  • GPIO connector Intel
  • Connectors forsensorsfrom the Gravity series

Connector 2x20 pin

male

The number of GPIO

20 - Atmega32u4

2 - Intel

20 - Atmega32u4

2 - Intel

40 - Broadcom

Power

5.0 V / 2.0 A

via microUSB

5.0 V / 2.0 A

via microUSB

A 5.1 V / 2.5 A

via microUSB

Tile sizes 88 x 70 mm 88 x 70 mm 85 x 56 mm Interfaces USB interface

2x USB 2.0 - type a

1x USB 3.0 - type a

2x USB 2.0 - type a

1x USB 3.0 - type a

4x USB 2.0 - type a Network interface

Ethernet port

10/100 Mbps

Ethernet port

10/100 Mbps

Ethernet port 10/100 Mbps The Wi-Fi Interface

802.11 b/g/n 150 Mbps

02.11 b/g/n 150Mbps 802.11 b/g/n 150 Mbps Bluetooth Low Energy, BLE 4.0 Low Energy, BLE 4.0 Low Energy, BLE 4.1 Camera - - the CSI slot

Touch display

special slot special slot slot for DSI Video

HDMI HD 1080p

30 fps

HDMI HD 1080px

30 fps

HDMI HD 1080px / 30 fps Audio HDMI + audio Jack HDMI + audio Jack HDMI + audio Jack Communication UART, SPI, I2C, GPIO UART, SPI, I2C, GPIO UART, SPI, I2C, GPIO

 

Included
  • Minicomputer LattePanda
  • External wi-fi antenna

 

Useful links
  • Project page LattePanda
  • User manual LattePanda
  • Website of supplier: DFrobot DFR0444
  • Specification of CPU and graphic card
  • Test of graphics card - Benchmark
  • Site LattePanda in the service KickStarter
  • Installation instructions for Windows LattePanda
  • Purchasing the Windows system
  • Project Pinball