LattePanda 3 Delta 864 - 8GB RAM + 64GB eMMC Intel Celeron N5105 - Windows 10
- Артикул:
- 111100180
Характеристики
- UC - PWM
- 7
- UC - USB
- 4x USB
- UC - I2C
- yes
- UC - ядро
- 4. Quad Core
- UC - WiFi
- yes
- UC - HDMI
- yes
- UC - UART
- yes
- UC - Linux
- yes
- UC - Разъем
- USB typ C
- UC - Windows
- yes
- UC - Ethernet
- yes
- UC - Bluetooth
- yes
- Интерфейс UC - SPI
- yes
- Интерфейс UC - LCD
- yes
- UC - оперативная память
- 8 ГБ
Общие характеристики
- UC - частота
- 2.9 GHz
- UC - аналог в
- 12
- UC - Внешняя память
- eMMC 64GB
- UC - Микроконтроллер
- N5105
Прочие свойства
- Бренд
- LattePanda
Описание
LattePanda 3 Delta 864 is the next installment in this series. This version is licensed under Windows 10 Enterprise . The minicomputer was based on the 11th generation Intel processor - Celeron N5105 Quad-Core clocked from 2.0 GHz to 2.9 GHz. The processor has a built-in Intel UHD Graphic graphics system clocked from 450 MHz to 800 MHz. The board is equipped with 8 GB of LPDDR4 RAM clocked at 2933 MHz and 64 GB of eMMC v5.1 memory . The ATmega32U4 coprocessor, compatible with Arduino Leonardo , allows you to program in Arduino with the use of numerous libraries. The built-in wireless communication system allows for WiFi 6 2.4 GHz and 5 GHz communication, as well as Bluetooth 5.2 . The device is equipped with numerous interfaces, such as USB 3.2, USB C, HDMI, DisplayPort, Ethernet Gigabit, and a TPM 2.0 module.
The manufacturer has prepared a detailed user guide , which greatly facilitates the start of working with a minicomputer - check it out!
LattePanda 3 Delta 864 - 8 GB RAM + 64 GB eMMC Intel Celeron N5105.
- Increased processor performance - The 11th generation N5105 Quad-Core processor is characterized by very good performance.
- More RAM and eMMC - 8 GB of LPDDR4 RAM and 64 GB of eMMC memory, ensures high performance and multitasking.
- Ultra-fast connectivity - WiFi 6 wireless communication and gigabit Ethernet port.
- Higher data transfer speed - 1x USB 3.2 gen2, 2x USB 3.2 gen1 and 1x USB Type-C ensure high data transfer speed, they are up to 10 times faster than USB 2.0.
- Dual 4K HDR and 3-way video output - HDMI, DisplayPort over USB-C and eDP for great flexibility.
- Rich IO interfaces and Arduino ATmega32U4 coprocessor - compatible with over 200 sensors and actuators.
- It supports Windows 10 and Windows 11 , as well as Linux systems. This version comes with a Windows 10 Enterprise license.
Our store also offers a version without the system .
- GPIO pins
- RTC
- USB 3.2 Gen2
- 2x USB 3.2 Gen1
- System switch - pin
- System control and signal pin
- 2-channel audio output
- RS232
- USB 2.0 on pin connectors
- DC 12V power port
- USB type C - display, Hub, PD power
- Headphone jack
- Gigabit Ethernet
- HDMI 2.0b
- System switch - button
- Variable speed fan connector
- Arduino outputs
- Power supply - a dedicated 45 W power supply is included in the set
- HDMI cable - necessary to connect the monitor with a minicomputer
- Keyboard and mouse - for controlling and entering data
- Operating system e.g. Windows 10, Windows 11 or Linux (license included)
The LattePanda 3 Delta 864 board is equipped with eMMC memory with a capacity of 64 GB, on which the operating system can be installed. To run the board:
- Plug the WiFi antenna into the socket
- Connect the HDMI cable to the monitor
- Connect the mouse and keyboard
- Then connect the power to the USB Type-C port using the supplied power adapter
- Press and hold the power button for approximately 1 second. The built-in blue LED will illuminate and the operating system will start up. The default is Windows 10.
For more information, see the user guide.
The board has basic communication interfaces that can also be found in office PCs. The following are at the user's disposal:
- Four connectors: 2x USB 3.2 gen1 type A, 1x USB 3.2 gen2 type A, USB type C
- Gigabit Ethernet socket with which you can transfer data over Ethernet at speeds up to 1000 Mb / s
- Dual-band WiFi 6 module - enables communication with the 802.11 ac wireless network
- Bluetooth 5.2 module - allows you to transfer data via a popular interface
- GPIO - general-purpose outputs / inputs that can be used to operate many peripheral devices, including LEDs , buttons or motor drivers.
2x USB 3.2 Gen1 - type A 1x USB 3.2 Gen2 - type A 1x USB type C - PD, DP, USB 2.0 1x USB 2.0 - on the GPIO pins
3x USB 3.0 - type A 1x USB 3.0 - type C Network interface Ethernet 10/100/1000 Mbps port Ethernet 10/100/1000 Mbps port WiFi interface Dual Band 2.4 GHz and 5 GHz Dual Band 2.4 GHz and 5 GHz 802.11 b / g / n / ac Bluetooth BLE 5.2 BLE 5.0 Touch display dedicated socket dedicated socket Video1x HDMI 2.0b - up to 4096 x 2160 px @ 60 Hz HDR 1x DP1.4 - up to 4096 x 2160 px @ 60 Hz HDR 1x eDP - additional display up to 1920 x 1080 px
HDMI HD 4K eDP Audio microphone and headphone connector HDMI + audio jack Communication 12x analog inputs 23x digital I / O (7 PWM) 1x UARR 1x I2C 1x SPI 1x audio 1x RS232 4-pin 1x fan connector 1x 4-pin connector (power and switch) 1x M.2 B key - 4G / 5G module, SATA SSD 1x M.2 M Key - NVMe SSD UART, I2C, I2S, GPIO, TTL, RTCThe set includes the LattePanda Delta module and the necessary accessories.
- LattePanda 3 Delta 864
- Active cooling fan (built-in)
- 45W PD Power Adapter (with standard EU and US power cord)
- Dual band antenna
- RTC battery (built-in)
- Mounting elements: spacers and screws
- User manual
- Windows 10 IoT Enterprise activation code
- Manufacturer's website
- User Guide
- Technical documentation of LattePanda
- Comparison table of LattePanda versions
- Tutorial: System Installation