Laboratory power supply Korad KWR102 0-30V 0-30A

Single-channel laboratory power supply with full voltage regulation from0 to 30 Vand current from0 to 30 Aand a high resolution of 1 mV / 1 mA current measurement. It is characterized by maintaining a high power factor in the full range and the possibility of changing the voltage gradient increase.

Korad KWR102 - voltage rise characteristics over time.

CoradKWR102 - voltage variation characteristics over time,looped.

The device has a programmable measurement memory, which can be assigned to one of five buttons on the front of the device. KWR102 is small in size and generates little noise during operation.

Korad KWR102. Otherlaboratorypower supplies are also available.

• OVP - surge protection
• OCP - overload protection
• OVT - protection against excessive temperature

• LAN
• USB
• RS232

Communication connectors KORAD KWR102.

The power supply works with LabVIEV software. The KWR102 can be controlled via the front panel of the device or through the software.

The power supply can be operated by means of LabVIEV.

• Voltage range: 0 to 30 V
• Current range: 0 to 30 A
• Power: 300 W
• The modes of operation:
  • C. V. - constant voltage at the output
  • C. C. - constant load current
• Load adjustment:
  • Voltage:< 0.01% + 1 mV
  • The intensity:< 0.1% + 3 mA
• Line adjustment
  • Tension:< 0.01% + 3 mV
  • Intensity:< 0.1% + 3 mA
• Adjustment of settings:
  • Voltage: 1 mV
  • The intensity: 1 mA
• Read resolution:
  • Voltage: 1 mV
  • The intensity: 1 mA
• Working accuracy (at 25°C +/-5°C):
  • Tensions:< 0.5% + 3 mV
  • The intensity:< 0.5% + 3 mA
• Noise:
  • Voltage:< 1 mVrms
  • The intensity:< 5 mArms
• Time for the tension to build up:
  • Tension build-up:< 50 ms
  • Voltage drop:< 50 ms
• Weight: 2.2 kg
• Dimensions: 91,5 x 185 x 305 mm

The operating range of the power supply.

• Korad KWR102
• Power cable
• USB cable
• RS232 cable
• Operating instructions
• Controller board

Cables included in the power supply kit.

• Manufacturer's website