KNIPEX Pointed Pliers 200 mm

The pliers for professional installation and assembly work, and for cutting - The Knipex 26 16 200 is primarily used by electricians carrying out installation, wire feeding and assembly work and who also want a professional cutting function on the pliers. The cutting edges of the pliers are shaped to produce a bite type cut. The cutting edges are additionally induction hardened to approx. 61 HRC so that the pliers can even be used to cut hard wire. Inherently stable also where there is twisting and very strong when cutting - The precision tips made of vanadium electric steel are elastic and stable when twisted. This allows the manual force deployed using these pliers to be well measured, which is a particular benefit with delicate components. The needle nose pliers can also be used for powerful gripping and holding – and for cutting. Thanks to the position of the cutting edges near the joint which is advantageous for the transmission of force, good cutting capacities are achieved. Medium-hard wire can be cut up to Ø 3.2 mm and hard wire up to Ø 2.2 mm. Components and wire in unfavourable positions can also be reached well - In the control cabinet, on a machine, on an electric motor, when feeding and connecting wire to terminals, in junction boxes, in control cabinet construction: the VDE tested Knipex 26 16 200 is in its element wherever space is tight. The qualities of the snipe nose side cutting pliers from Knipex will be immediately apparent when lines and wires need to be held, fed and cut. The quality chrome plating offers good protection against dirt and corrosion. This corrosion resistance makes special sense when the pliers are kept permanently in the service vehicle, where they may be exposed to condensation caused by temperature changes. - Needle nose pliers (stork beak pliers) for assembly, alignment and gripping work, especially in the electrical trade - Very long pointed, flat rounded jaws - Cutting edges with bite type cut for soft, medium-hard and hard wire; cutting capacity for medium-hard wire Ø 3.2 mm, cutting capacity for hard wire Ø 2.2 mm - Forged from vanadium electric steel and oil-hardened; cutting edges additionally induction hardened to approx. 61 HRC for exceptionally high cutting force - Pliers are chrome-plated - Length 200 mm - Weight 204 g - Insulated with multi-component grips - VDE tested The VDE tested snipe nose side cutting pliers from Knipex are a tool especially for installation and assembly work in poorly accessible areas in the electrical trade. Those who use tools professionally every day expect a quality that permits simple and safe work and which lasts for many years of hard use. We produce our tools from quality materials, machine them with great precision on up-to-date machinery, and harden them carefully using repeated heat treatment. Every pair of Knipex pliers represents more than 130 years of specialist know-how. Specifications: - Pliers: chrome-plated - Head: chrome-plated - Handles: insulated with multi-component grips, VDE-tested - Weight: 206 g - Dimensions: 200 x 56 x 19 mm - Standard: DIN ISO 5745 DIN EN 60900 IEC 60900 - Reach: no - RohS: no - Cutting capacities medium hard wire (diameter): Ø 3.2 mm Cutting capacities hard wire (diameter): Ø 2.2 mm - Jaw thickness (joint) (T1): 9.5 mm - Tips width (W4): 3.0 mm - Tips thickness (T2): 2.5 mm - Jaw length (L3): 73.0 mm - Head width (W3): 18 mm