Kitronik Robotics Board - controller for 4 motors and 8 servos - 3-10.8V - for Raspberry Pi Pico - Kitronik 5329
- Артикул:
- 42764052
Характеристики
- Напряжение до
- 3.0 V
Общие характеристики
- Напряжение от
- 10.8 V
Прочие свойства
- EAN
- 6609025153872
- Бренд
- KITRONIK
- Тип датчика
- motor driver
Свойства
- Тип
- Запчасть для микрокомпьютера
Описание
A module manufactured by Kitronik in the form of amotor and servo controller. The Kitronik Robotics Board allows you to controlfourDCmotors (ortwosteppermotors) andeightservos. In addition, it also has27 IO leadswith which you can extend the functionality of theRaspberry Pi Pico. The maximum current consumption per motor is1.5 A, and the maximum continuous current for all connected servos and motors should not exceed12 A. The supply voltage of the components rangesfrom 3 V to 10.8 V. Importantly, the controller allows simultaneous forward, reverse and stopping of the motors - all while maintaining total control. In turn, connected servos can be controlled via anI2Cinterface. The controller is designed to work withRasppberry Pi version Pico.
Product compatible with Raspberry Pi Pico!
Auser guideis available on the manufacturer's website as well as useful repositories to download on GitHub. Find out how to program a motor controller usingMicroPythonandCircuitPython.
Kitronik's module for controlling stepper motors, DC motors and servos.
- Compact size and a range of capabilities in one allows you to maximize the functionality of robots based onRaspberry Pi Pico
- Allows control of four DC motors (or two stepper motors) and up to eight servos
- Forward, reverse and stop control functions
- Built-in physical on/off switch and status LED
- Board equipped with convenient screw connectors
- The motor controller from Kitronik also contains 27 additional GPIO connectors that can be used to connect peripheral devices
- MOTOR1 - MOTOR4 - the first to fourth motor connectors
- SERVOS1 - SERVOS8 - servo connectors first - eighth
- GPOx - IO pinout
The controller has GPIO pins and screw connectors.
For proper operation of the motor controller it is necessary to useRaspberry Pi Pico, which is not part of the kit. It can be purchased separately in our shop.
Connecting the motor controller to the Raspberry Pi Pico.
- Compatible with Raspberry Pi Pico version
- Communication interface: I2C
- I2C interface address:
- 0x6C (default)
- 0x6D (configured)
- 0x6E (configured)
- 0x6F (configured)
- Supply voltage range: 3 V to 10.8 V
- Number of supported channels:
- DC motor: 4
- stepper motor: 2
- servo motor: 8
- Motor voltage: 3 V to 10.8 V
- Maximum current consumption for one motor: 1.5 A
- Maximum continuous current for all servos and motors: 12 A
- Dimensions:
- board dimensions: 68 x 56 x 10 mm
- PCB thickness: 1.6 mm
- diameter of mounting holes: 3 mm
- Manufacturer's website: Kitronik 5329
- User guide
- Sample program code for MicroPython
- Sample program code for CircuitPython
- A practical guide to modules, the MicroPython language and the Raspberry Pi Pico