iNode MCU Relay - Bluetooth 4.1 and WiFi - for iNode Care Sensor
- Артикул:
- 54536222
Характеристики
Протоколы
- Communication
- Bluetooth, WiFi
Прочие свойства
- Бренд
- iNode
Свойства
- Каналы
- 1
- Подключение
- Блютус
Описание
Programmable iNode MCU Relay designed to work with the iNode Care Sensor series. The module works wirelessly and supports Bluetooth 4.1 and WiFi communication. iNode MCU Relay is an element that enables the implementation of scenarios related to the broadly understood home automation - it can be used to care for the elderly, it allows you to turn on / off other devices after certain events, e.g. exceeding the set temperature or humidity, moving the sensor or changing its position .
Check also other products from the iNode series - Android Bluetooth sensors and modules!
iNode MCU Relay - Bluetooth 4.1 and WiFi relay - for iNode Care Sensor.
iNode MCU Relay with screw connection.
iNode MCU Relay is based on MicroPython ESP32 - a script interpreter for the MicroPython programming language (based on Python 3.4). For maximum user security, the MicroPython firmware is digitally signed and can only be replaced by OTA. The user can create his own scripts in Python and load them to the device. Everything is done using the iNodePY application. Free Python scripts are available on the support site . The device does not have a pre-loaded program - you should do it yourself.
- Communication with BLE devices
- Alarm systems, property protection
- Patient monitoring
- Caring for the elderly
- Home automation
Radio parameters
- RX / TX
- Bluetooth / BLE: 2402-2480 MHz, Sensitivity: @ 30.8% PER: -97 dBm
- WiFi: 2412 - 2472 MHz / 2422 - 2462 MHz
- Output power (maximum):
- Bluetooth: 6.72 dBm
- BLE: 8.23 dBm
- WiFi: 16.81 dBm (802.11b); 17.60 dBm (802.11g); 18.04 dBm (802.11n20); 17.85 dBm (802.11n40)
- Modulation:
- Bluetooth: GFSK, π / 4-DQPSK, 8DPSK
- BLE: GFSK
- WiFi: DSSS, OFDM
- Antenna:
- internal PCB type MIFA, 1.6 dBi
Work parameters
- Configurable from PC via Bluetooth:
- WiFi access data
- Python scripts that control the operation of the device
- MicroPython firmware replacement via OTA (WiFi)
Node MCU power supply
- Voltage: 6 V to 40 V DC,
- Current: 43 mA at 12 V (firmware dependent)
Dimensions
- 55 x 18 x 12 mm
The remaining
- Signaling of operation in the configuration mode by means of LEDs
- FLASH memory for Python scripts: approx. 500 KB
- One potential-free output: 40 V AC / DC 500 mA 2.5 Ohm (semiconductor relay, PhotoMOS type)
- Clamp connector, 4 pin screw 2.54 mm
- Working temperature: -20 ° C to 45 ° C
- Humidity: 20 to 80% RHG
- Weight: 15 g
Software
- Google CHROME: Android OS, Linux, Windows 10
Chipset
- ESP32
- User Guide
- ESP32 chipset - technical documentation
- Technical support service
- iNodePY - file system support
- iNode MQTT Monitor - device monitoring