iNode LAN - Bluetooth gateway with internal antenna

iNode LAN enables access to iNode Bluetooth BLE devices in networks with the Ethernet protocol. The use of this module allows you to extend the range of iNode Care Sensors inside the building or track the movement of the iNode Nav device online. Thanks to this function, iNode LAN is an effective tool for integrating and managing iNode Bluetooth devices in Ethernet-based environments. Detailed information on configuration and possible use is available in the user manual.

1. The device's power supply can be connected via an RJ45 Ethernet cable with a PoE adapter.
2. In Windows, after successful connection, the iNode LAN device will appear in the "Network Neighborhood" section. Just double-click the icon to enter the configuration section through your browser.
3. Detailed instructions on configuring and controlling iNode devices are available in the user manual .

• Goods tracking
• Data acquisition
• Air conditioning and ventilation (HVAC)
• Industry
• Home automation
• Alarm systems and property protection

• Ethernet - configurable via browser
  • BLE operating mode: AUTO SCAN or REPEATER
  • power: from -18 dBm to 8 dBm
  • LAN network parameters: IP address (static or via DHCP), network mask, gateway, DNS server, NTP time server
  • device name in LAN and BLE
  • IP address and port to which UDP packets are sent
  • sending method: multicast, unicast or broadcast is configured automatically based on the IP address
  • user password
  • administrator password
• Power supply: POE 6V to 30V/40mA, 100Mbps 24V/60mA, 100Mbps 12V/120mA, 100Mbps 6V
• Remote control via TCP/IP telnet on port 5500
• Possibility to replace software - via a browser
• Two LEDs: ethernet LINK and STATUS
• HTTP server:
  • 6.9 MB for user HTTP pages and 1 MB for system HTTP pages
  • WebSocket technology support
  • Supports up to 2 connections at the same time
• Reset button: restores factory values
• Temperature sensor with a resolution of 1°C
• Operating temperature: from -20°C to 45°C
• Humidity: from 35% to 80% RGH
• Chipset: CSR 101x and W5500
• Built-in JavaScript/WebSocket/HTML5 application - iNode Monitor
• Housing: metal
• Dimensions: 81 x 38 x 22 mm
• Weight: 45 g

• User manual