HDMI adapter - CSI 1080p 30fps - for Raspberry Pi - Waveshare 19137

HDMI - CSIcameraportadaptercompatible with all versions of the Raspberry Pi minicomputer. Supports camera with up to 1080p resolution at 30 frames per second display speed.

HDMI - CSI adapter for Raspberry Pi minicomputer.This item is an adapter, the FPC cable and the Raspberry Pi minicomputer must be purchased separately.

1. Connect the Raspberry Pi's FPC cable to the CSI interface. Raspberry Pi versions 2B, 3B, 3B+ have the connector located between the LAN port and the HDMI port, and Raspberry Pi version 4B has the connector located between the HDMI1 connector and the audio jack. For Raspberry Pi Zero, the CSI interface is located next to the power port.
2. The side of the ribbon (FPC cable) where the connectors are located should face the HDMI interface. Loosen the black clamp, position the FPC cable accordingly and push it firmly into the hole. Then tighten the black clamp.
3. The Raspberry Pi camera interface isdisabledby default. It is necessary to change the settings and enable the camera before using it.
4. Start Raspberry Pi command terminal -> execute sudoraspi-config ->select Interfacing Options -> P1 Camera -> and restart Raspberry Pi by selecting Yes

The product wiki page provides additional configuration information along with instructions complete with pictures.

• HDMI - CSI adapter
• Compatible with all versions of the Raspberry Pi minicomputer
• Maximum camera resolution: 1080p
• Number of displayed frames per second: 30 fps
• Dimensions: 45 x 30 mm
• Mounting holes diameter: 2.65 mm

• Manufacturer's website: Waveshare 19137
• Product Wiki page