NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 512MB RAM + 8GB eMMC - with headres
- Артикул:
- 43302810
Характеристики
- UC - I2C
- yes
- UC - USB
- microUSB
- UC - UART
- yes
- Интерфейс UC - SPI
- yes
Общие характеристики
- UC - ядро
- 4. Quad Core, Cortex A7
- UC - HDMI
- yes
- UC - Linux
- yes
- UC - Разъем
- 5V microUSB
- UC - microSD
- yes
- UC - Android
- Нет
- UC - Windows
- Нет
- UC - частота
- 1.2 GHz
- UC - Ethernet
- yes
- Интерфейс UC - LCD
- Нет
- UC - Внешняя память
- eMMC 8 GB
- UC - Микроконтроллер
- Allwinner H3
- Интерфейс UC - камеры
- Нет
- UC - Цифровые контакты
- 68
- UC - оперативная память
- 512 MB
Производительность
- Тип
- Запчасть для микрокомпьютера
Прочие свойства
- EAN
- 5904422343118
- Бренд
- FriendlyARM
Описание
A smallNanoPi Neo Coreminiature computer with a quad-coreAllwinner H3processor clocked at1.2 GHz. On board the board there is8 GB of eMMC memoryand512 MB of DDR3 RAM. There were 3 USB Host and Ethernet ports (located on the pins),microSD cardslot and a microUSB connector. NanoPi is equipped with 68 GPIO pins.It works with the systems:Slaughterhouse, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.
The system uses themicroUSBconnector as the power source. The manufacturer recommends that the voltage given on the connector should be5.0 V, while the current capacity of the power supply used should be at least2.0 A. In our offer you will findpower supplies meeting these parameters.
Operating systemNanoPi works with Debian systems. The drive can be amicroSDcard, which can be purchased from our store.
Operating systems can be downloaded fromthe manufacturer's website.The manufacturer also provides asystem installation guide.
You have it:
- GPIO x 68 pin- general purpose outputs/inputs, which can be used to operate LEDs, buttons,motorcontrollers. Among them there are pins supporting the interfaces: I2C, SPI and UART.
- MicroSD slot- slot for a microSD memory card, on which the operating system can be installed.
- Manufacturer's website FriendlyArm
- User guide
- Downloadable operating systems
- Installation of the system
- Diagram of the tiles
- Allwinner H3 documentation