FormFutura resin cleaner EasyClean - 1l

An agent designed toclean the uncured resin residuethat remains on the print after model forming is complete. It removes excess material for printing cured with light of wavelength from 385 nm to 420 nm, used in SLA, DLP and LCD printers. EasyClean remover consists of organic solvents. The product is safe, more effective and up to three times more efficient than traditional isopropyl alcohol. The remover is sold in1000 mlpackaging.

FormFutura EasyClean ResinRemover.

FormFuturaEasyCleanResin Remover.

• Excellent cleaning properties. Removes excessresinbetter than traditionally used isopropyl alcohol (IPA)
• Leaves no white residue or cloudiness on the model.
• Designed to wash UV cured resins in SLA, DLP and LCD 3D printing technologies
• No transport restrictions
• Not classified as dangerous goods by ADR and IATA
• Non-flammable
• Does not emit excessive amounts of unpleasant, irritating odors during use
• Can also be used to clean worktops, ladles and other surfaces that come into contact with resins
• Shelf life of the remover is 24 months

• Place the printout in a container filled with EasyClean resin cleaner
• Clean by hand for 10 to 15 minutes or for 5 minutes using an ultrasonic cleaner
• After cleaning, allowthe 3D printed modelto dry or rinse it under running water

The product should be stored in a well-ventilated room in the original sealed HDPE container. The storage temperature of the remover should not exceed 25°C. EasyClean has a shelf life of up to 24 months when stored properly.

The subject of the sale is a remover with a capacity of 1000 ml. A5000ml canisterof theproduct is also available.

• Manufacturers website
• Technical documentation