FireBeetle ESP32-E - IoT WiFi, Bluetooth - Arduino compatible - DFRobot DFR0654
- Артикул:
- 111100139
Характеристики
- UC - I2C
- yes
- UC - UART
- yes
- Напряжение от
- 5.0 V
- Напряжение до
- 3.3 V
- Интерфейс UC - SPI
- yes
- UC - Микроконтроллер
- ESP32
Общие характеристики
- UC - ядро
- Tensilica
Прочие свойства
- EAN
- 6959420918362
- Бренд
- DFRobot
Описание
FireBeetle ESP32-E microcontroller compatible with FireBeetle V2 series modules and Arduino board. Integrates Dual-Core ESP-WROOM-32 module that supports MCU, WiFi and Bluetooth communication. The processor clock is 240 MHz, the Flash memory is equal to 4 MB and the SRAM memory is 520 kB. A USB Type-C connector and a GDI connector have also been placed on the board to connect a display. The operating status of the FireBeetle ESP32-E is indicated by built-in RGB LEDs.
The product iscompatible with Arduino. The manufacturer provides a product wiki page that contains a detailed user guide and sample program codes.
FireBeetle ESP32-E from DFRobot.
Goldpin sockets and plugs are included - 2.54 mm raster.
- Compatible with FireBeetle V2 product series from DFRobot
- Works with Arduino board
- Equipped with ESP32-E dual core processor
- GDPI connector for convenient display connection
- FireBeetle ESP32-E board
- 1x14 pin straight socket - 2.54 mm pitch
- 1x18 pin straight socket - 2.54 mm pitch
- 1x14 pin goldpin connector - 2.54 mm pitch
- Goldpin 1x18 pin connector with 2.54 mm pitch
- GND - system ground
- VCC - power supply pin 5V
- 3V3 - power supply pin 3.3 V
- RST - RESET pin
- EN - 3,3 V regulator control pin
- GPIO
- from D2 to D13 - general purpose pins
- A0 to A4 - analogue input pins
- SDA - I2C interface data line pin
- SCL - I2C interface clock line pin
- SCK / MOSI / MISO - SPI interface pins
The module is equipped with a dual core Tensilica LX6 processor.
- Chip: ESP-WROOM-32
- Processor:
- Tensilica LX6 dual-core
- Clock speed: 240 MHz
- Flash memory: 4 MB
- SRAM memory: 520 kB
- WiFi Standard: 802.11 b / g / n / d / e / i / k / r
- Frequency range supported: 2.4 GHz to 2.5 GHz
- Bluetooth protocol: compliant with Bluetooth v4.2 BR / EDR and BLE standards
- Connector: USB type C
- USB charging supported
- USB to UART converter: CH340K
- Supply voltage: 3.3 V / 5 V
- Power consumption: 10 µA
- Pinouts:
- analog pins - 5 pcs.
- Digital pins - 10 pcs.
- UART - 1 pc.
- I2C - 1 pc.
- SPI - 1 pc.
- GDI - 1 pc.
- Signalling: Built-in RGB LEDs
- Connectors compatible with FireBeetle V2 series
- Operating temperature range: from -40°C to 85°C
- Mounting hole size: 2 mm
- PCB dimensions: 25.4 x 60 mm
- Weight: 23 g
The FireBeetle ESP32-E microcontroller DFRobot DFR0654 is a board which is perfect for IoT applications and modern building automation. The product is fully compatible with Arduino and FireBeetle v2 modules.
Status signalization is realized by means of built-in LEDs. The FireBeetle ESP32-E can be powered by both 3.3 V and 5 V, which increases its flexibility and applicability in various electronic projects.
FireBeetle IoT module compatible with Arduino boardsThe FireBeetle ESP32-E IoT module is compatible with Arduino platform and FireBeetle products from DFRobot, so it can be used in applications using both series of products. For example, it can be used as part of a remotely communicating controller for building automation.
For more information on this product and its applications, please follow the links in the description section. In our offer you can also find many other interesting extensions for Arduino compatible with Micro, Uno, Mega and Leonardo boards.
- Manufacturer's website: DFRobot DFR0654
- Product Wiki page
