FireBeetle ESP32-E - IoT Microcontroller with Header - DFRobot DFR0654-F
- Артикул:
- 111100141
Характеристики
- UC - I2C
- yes
- UC - UART
- yes
- UC - ядро
- Tensilica
- Напряжение от
- 5.0 V
- Напряжение до
- 3.3 V
- Интерфейс UC - SPI
- yes
- UC - Микроконтроллер
- ESP32
Прочие свойства
- Бренд
- DFRobot
Описание
FireBeetle ESP32-E is a module with microcontroller, compatible with FireBeetle V2 series modules. It can be programmed using Arduino IDE environment. The FireBeetle ESP32-E integrates the Dual-Core ESP-WROOM-32 module, supporting communication in MCU mode, WiFi and Bluetooth. The microcontroller is equipped with Flash memory equal to 4 MB and SRAM memory equal to 520 kB. The processor clock frequency is 240 MHz . On the board there is also USB type C connector and GDI connector, which allows you to connect a display. Built-in RGB LEDs indicate operating status of FireBeetle ESP32-E.
Theproduct is compatible with ArduinoThe manufacturer provides a product wiki page that contains a detailed user guide and sample program code.
FireBeetle ESP32-E - IoT WiFi, Bluetooth - with connectors.
Goldpin sockets and plugs are included - 2.54mm raster.
- Compatible with FireBeetle V2 product series from DFRobot
- Programmed using the Arduino IDE environment
- Equipped with ESP32-E dual core processor
- GDPI connector for convenient display connection
- FireBeetle ESP32-E board with connectors
- 1x14 pin straight socket - 2.54 mm pitch
- 1x18 pin straight socket - 2.54 mm pitch
- Goldpin 1x14 pin connector with 2.54 mm pitch
- Goldpin 1x18 pin connector with 2.54 mm pitch
- GND - system ground
- VCC - power supply pin 5V
- 3V3 - power supply pin 3.3 V
- RST - RESET pin
- EN - 3,3 V regulator control pin
- GPIO
- from D2 to D13 - general purpose pins
- A0 to A4 - analogue input pins
- SDA - I2C interface data line pin
- SCL - I2C interface clock line pin
- SCK / MOSI / MISO - SPI interface pins
Pinout description.
- Chip: ESP-WROOM-32
- Processor:
- dual core Tensilica LX6
- Clock speed: 240 MHz
- Flash memory: 4 MB
- SRAM memory: 520 kB
- WiFi Standard: 802.11 b / g / n / d / e / i / k / r
- Frequency range supported: 2.4 GHz to 2.5 GHz
- Bluetooth protocol: compliant with Bluetooth v4.2 BR / EDR and BLE standards
- Connector: USB type C
- USB charging supported
- USB to UART converter: CH340K
- Supply voltage: 3.3 V / 5 V
- Power consumption: 10 µA
- Outputs:
- Analogue pins - 5 pcs.
- Digital pins - 10 pcs.
- UART - 1 pc.
- I2C - 1 pc.
- SPI - 1 pc.
- GDI - 1 pc.
- Signalling: Built-in RGB LEDs
- Connectors compatible with FireBeetle V2 series
- Operating temperature range: from -40°C to 85°C
- Mounting hole diameter: 2 mm
- PCB dimensions: 25.4 mm x 60 mm
- Weight: 23 g
- DFRobot DFR0654-F manufacturer page
- Product Wiki page