Filament Rosa3D ReFill PLA Starter 1,75mm 1kg - Pearl Gold

Description: Filament Rosa3D ReFill PLA Starter 1,75 mm 1 kg - Pearl Gold

Filament of biodegradable biopolymer in the color of pearl gold. PLA Starter line was prepared with a view to beginners 3D printers users. The material is characterized by great ease of printing while maintaining high detail of the formed 3D models. PLA Starter shows low shrinkage and good adhesion of the first print layers. During melting it does not emit an unpleasant smell. The diameter of the filament is 1,75 mm. Weight of the material is 1 kg.

In our offer of filaments you will also find other materials and colors.

Filaments used in 3D printing.

Additional information about PLA

• Ideal choice for beginners
• Environmentally safe product, made of biodegradable biopolymer
• Good adhesion between layers
• High accuracy and detail of the printed piece
• Filament has been produced from ingredients approved for contact with food. However, it should be remembered that in the case of products that come into contact with food, the responsibility of certification rests with the manufacturer of the final product
• PLA Starter Filament can be used in 3D printers not equipped with unheated workbenches. If problems with adhesion are noted, use an adhesion promoter

Head temperature From 190°C to 225°C Table temperature From 40°C to 60°C Print cooling 70% to 100% Recommended print speed From 60 mm/s to 80 mm/s

Due to differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Filament Rosa3D ReFill PLA Starter 1,75 mm 1 kg - Pearl Gold.

Technical specification of PLA Starter Filament Parameter Range Dimensional tolerance of the filament +/- 0,05 mm Dimensional tolerance of oval +/- 0,02 mm Heat distortion temperature 55°C (ASTM E2092) Density 1,24 g/cm3 Tensile elongation 6% (ASTM D882) Tensile Strength (Breaking) 53 MPa (ASTM D882) Modulus of elasticity 3500 MPa (ASTM D882) Odour odourless Material biodegradable biopolymer Diameter 180 mm Width 55 mm Mounting hole diameter 93 mm Vacuum packing Yes Moisture absorber Yes Product weight 1 kg net weight

Useful links

• Manufacturer's website
• Product card
• What is 3D Printing
• Filaments in 3D printing