Filament Rosa3D ASA 1,75mm 0,7kg - White

Бестселлер

Артикул:: 54165339

Filament Rosa3D ASA 1,75mm 0,7kg - White

Фото #1 товара Filament Rosa3D ASA 1,75mm 0,7kg - White

Фото #2 товара Filament Rosa3D ASA 1,75mm 0,7kg - White

Фото #3 товара Filament Rosa3D ASA 1,75mm 0,7kg - White

Фото #4 товара Filament Rosa3D ASA 1,75mm 0,7kg - White

10 241 AMD

Бренд Rosa3D
Доставка из Польши
Курьер DHL 10 июня
Стоимость доставки заказа в Армению от 59 066 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Диаметр нити накала: 1.75 mm

Вес и размеры

Вес: 0,7 kg

Дизайн

Цвет: Белый

Материал

Материал нити накала: ASA

Прочие свойства

Бренд: Rosa3D

Описание

Product description: Filament Rosa3D ASA 1.75 mm 0.7 kg - White

Blue ASA (acrylonitrile-styrene-acrylic) filament , used in 3D printers working in FFF / FDM technology. The material was pre-wound on a spool and vacuum-packed. The filament diameter is 1.75 mm . ASA filaments are resistant to UV radiation, moisture and heat, thanks to which the prints can be used outdoors. The material has less shrinkage. It gives off a little perceptible smell. The softening point of ASA prints is higher compared to PLA and PETG. ASA is suitable for automotive, marine and exterior applications such as mirror housings, covers, radiator grills and sensor housings.

In our offer of filaments you will also find other materials and colors.

Filament Rosa3D ASA 1.75 mm 0.7 kg - White.

Main features of ASA material

The ASA filament is resistant to UV radiation, moisture and heat. Can be used outdoors
ASA has lower shrinkage than popular ABS. It also gives off less annoying fumes during printing
The thermoplastic shows no signs of deformation up to a temperature of about 94 ° C
ASA material is often used in the automotive and marine industries

It is recommended to print in a closed chamber.

The adhesion of the first layer to the table can be improved with ASY juice (ASA material dissolved in acetone).

Suggested filament printing parameters Printing temperature 230 ° C to 260 ° C Table temperature From 70 ° C to 110 ° C Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Sample printout from ASA filament.

Technical specification and physical properties of the filament Parameter Range Filament diameter 1.75 mm Filament dimensional tolerance +/- 0.05 mm Colour White Printing temperature 230 ° C to 260 ° C Smell palpable, not intense Spool - material ASA Spool diameter 200 mm Spool width 55 mm Mounting hole diameter 52 mm Desiccant Yes Vacuum packing Yes Material density 1.07 g / cm 3 Tensile strength at break 40 MPa Elongation at break 35% Modulus of elasticity 1725 MPa Net weight 0.7 kg Useful links