Filament Fiberlogy Refill Easy PLA 1,75mm 0,85kg - Orange

Бестселлер

Артикул:: 42762013

Filament Fiberlogy Refill Easy PLA 1,75mm 0,85kg - Orange

Фото #1 товара Filament Fiberlogy Refill Easy PLA 1,75mm 0,85kg - Orange

11 545 AMD

Бренд Fiberlogy
Доставка из Польши
Курьер DHL 17 июня
Стоимость доставки заказа в Армению от 269 505 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Диаметр нити накала: 1.75 mm

Вес и размеры

Вес: 850 g

Дизайн

Цвет: Оранжевый

Материал

Материал нити накала: ПЛА

Прочие свойства

Бренд: Fiberlogy

Описание

Description: Filament Fiberlogy Refill Easy PLA 1,75 mm 0,85 kg - Orange

Orange filament made ofEasy PLAmaterial. It was vacuum-packed without a spool. It is designed for 3D printers working inFFF/FDMtechnology. The cartridge is water-resistant, biodegradable. The diameter ofthe filamentis1.75 mmand the material weight is850 g.

In our offer of filaments you will also find other materials and colors.

Refill ecological pillars

The advantage of the Refill is the lower price and the absence of disposable spools, which are thrown away after each use of the material. The Refill Easy PLA cartridge is designed to be used with the Masterspool reusable reel, which can be printed out by itself according toRichPap's design.This solution makes us care about the environment.

Filament Fiberlogy Refill Easy PLA Orange.

Properties of the Easy PLA Fiberlogy

Strong
It is not flammable
Highly warp-resistant material
It gives off a low intensity odour
Biodegradable
Waterproof
It has a low material shrinkage

Suggested print parameters for filament Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Easy PLA Fiberlogy specifications Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,02 mm Colour Orange Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Moisture absorber Yes Vacuum packing Yes Roundness +/- 0.01 mm Packaging dimensions 205 x 205 x 90 mm Net weight 0.85 kg

Easy PLA properties graph.

Useful links