Filament Fiberlogy Refill Easy PLA 1,75mm 0,85kg - Graphite

Description: Filament Fiberlogy Refill Easy PLA 1,75 mm 0,85 kg - Graghite

Refill Easy PLA ingraphite.TheRefillseries does not have a spool, which reduces the amount of disposable plastic spools produced. The classic reusable reel can be replaced by a reusable reel, which can be printed on your own, according to your own design orMasterspool design.TheEasy PLAfilters are characterized by very good print quality, very good adhesion between print layers and are biodegradable. The diameter of the filter cartridge is 1.75 mm and its weight is 850 g. Filament works with all3Dprintersworkingin FFF/FDM technology,which do not have protection against the use of filaments of other manufacturers.

In our offer of filaments you will also find other materials and colors.

Take care of the environment

The seamless refill series is a departure from standard solutions. Selling a single-use cartridge without spools is a big advantage, because it works for the environment and also helps us to save some money. Spoolless cartridges are cheaper to produce. The reusable Masterspool reel can be printed out on its own using theRichRap user'sfinished design.

Refill Easy PLA without spool.

Advantages of Easy PLA

Easy PLA is easier to print than regular PLA. It is produced from renewable raw materials and is therefore biodegradable. It is characterized by low shrinkage of the material and increased resistanceto UV rays.Due to its minimal water absorption, it is a waterproof material used for food packaging, surgical threads and even implants. The described filament has a poorly perceptible smell. It is not flammable.

Suggested printing parameters with Easy PLA filament Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Easy PLA pillar specification Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,02 mm Colour Graphite Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Moisture absorber Yes Vacuum packing Yes Roundness +/- 0.01 mm Packaging dimensions 205 x 205 x 90 mm Net weight 0.85 kg

Properties of the Easy PLA pillar.

Useful links

• Fiberlogy manufacturer's website
• What is 3D printing ?
• Philips in 3D printing
• Product specifications