Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Orange TR

Бестселлер

Артикул:: 42762003

Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Orange TR

Фото #1 товара Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Orange TR

11 541 AMD

Бренд Fiberlogy
Доставка из Польши
Курьер DHL 10 июня
Стоимость доставки заказа в Армению от 59 066 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Диаметр нити накала: 1.75 mm

Вес и размеры

Вес: 850 g

Материал

Материал нити накала: PETG

Прочие свойства

Бренд: Fiberlogy

Свойства

Цвет: Оранжевый

Описание

Description: Filament Fiberlogy Refill Easy PETG 1,75 mm 0,85 kg - Orange TR

RefillEasy PETGis a seamless filament made inorange. The material is enriched with glycol. The cartridge is designed for all 3D printers that work in FFF/FDM technology.The cartridge is characterized by increased chemical and mechanical resistance. The diameter ofthe filteris1.75 mmand the net material weight is850 g. The product is vacuum-packed.

In our offer of filaments you will also find other materials and colors.

Eco-friendly printing with Refill filaments

Refill material is sold without disposable spools. This makes the product not only cheaper than ordinary filaments wound on reels, but also after use there are no residues. Masterspool's reusable reel can be printed out by yourself according tothe RichRapa design.

Filament Fiberlogy Refill Easy PETG 1.75 mm 0.85 kg - Orange TR.

The advantages of PETG filament

PETG material designed for3D printersis characterized by high strength and low susceptibility to shrinkage and threading. PETG film isresistant to acids, salts, alkaline substances and does not emit unpleasant smells.The surface has a high gloss.

Suggested printing parameters of the filament Printing temperature From 230°C to 250°C Table temperature 90°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Fiberlogy Easy PETG filament specification Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,02 mm Colour Orange Printing temperature From 230°C to 250°C Table temperature 90°C Moisture absorber Yes Vacuum packing Yes Roundness +/- 0.01 mm Packaging dimensions 205 x 205 x 90 mm Net weight 0.85 kg

Easy PETG properties graph.

Useful links