Feather ESP32-S2 with TFT display - WiFi module, GPIO - 4MB Flash, 2MB PSRAM - Adafruit P5300
- Артикул:
- 119641667
Характеристики
- UC - I2C
- yes
- UC - USB
- USB C
- UC - WiFi
- yes
- UC - ядро
- 1. Single Core
- UC - Вспышка
- 4 MB
- UC - частота
- 240 MHz
Общие характеристики
- UC - Микроконтроллер
- ESP32-S2
Прочие свойства
- Бренд
- Adafruit
Описание
ESP32-S2 Feather is a board with a built-in TFT display from Adafruit . It retains all the characteristic features of Feather modules, offers the user an efficient ESP32-S2 microcontroller with WiFi communication and a clear TFT display with a resolution of 240 x 135 pixels . It has a native USB port , 4 MB Flash and 2 MB PSRAM, and is also ideal for working with CircuitPython or Arduino . Thanks to the native USB port, it can be used as a keyboard, mouse or MIDI device. The color TFT display uses the SPI interface and consumes only 100 uA of current in deep sleep mode. When all functions are disabled and the device is in deep sleep mode, the TFT display consumes only about 100 uA of current.
The manufacturer has prepared a detailed user guide , which makes it much easier to start working with the module.
- High-performance ESP32-S2 with native USB, allowing you to implement a variety of projects
- A small, FCC/CE certified module with ample memory, perfect for handling large amounts of data
- Color IPS TFT display, readable from any angle
- Possibility of power supply via USB type C connector
- Li-Pol battery monitoring
- Reset and DFU buttons and a serial debug pin
- STEMMA QT connector for easy integration with I2C devices
- Low energy consumption
- Intuitive LEDs informing the user about the module's operating status
Our offer also includes other products from Adafruit - check it out!
- USB Type-C port
- Li-Pol battery connector/charger
- CHG LED
- GND
- WHIP
- USB - with positive voltage
- PL - pin enabling the 3.3 V regulator
- 3.3V regulator output pins
- On-board MCU: ESP32-S2
- Tensilica 240 MHz processor
- Wireless WiFi communication
- 4 MB Flash memory and 2 MB PSRAM memory
- Color TFT display with a resolution of 240 x 135 px
- Power supply: USB Type C or Li-Pol battery
- MAX17048 system monitoring battery operation (when powered by a Li-Pol battery)
- Reset and DFU buttons (BOOT0)
- STEMMA QT connector for I2C devices
- LEDs indicating the module's operating and charging status (also NeoPixel support)
- Low power consumption up to 100 uA in sleep mode when powered by battery
- Compatible with Arduino or CircuitPython
- Dimensions: 52.4 x 22.8 x 7.2 mm
- Weight: 6.3 g
- Manufacturer's website
- User Guide
- ESP32-S2 technical data
