ESP32-S3-DevKitM-1-N8 - WiFi + Bluetooth - mini development board with ESP32-S3-MINI-1/1U chip

ESP32-S3-DevKitM-1-N8 development board in mini version based on ESP32-S3-MINI-1/1U chip. It supports WiFi wireless communication in 2 . 4 GHz band and Bluetooth LE in 5.0 standard. It has 8 MB of SPI Flash memory, 512 kB of SRAM memory (including 16 kB of RTC memory) and 384 kB of ROM memory. The board dimensions are 24.4 x 62.74 mm.

• Higher processing power and low power requirements compared to the previous version - ESP8266
• System on chip (SoC) family
• Allows communication via WiFi 802.11 b/g/n and via Bluetooth LE 5 Mesh
• Designed for use in compact projects
• ESP32 wireless communication modules form the basis of IoT (Internet of Things)

ESP32-S3-DevKitM-1-N8 - WiFi + Bluetooth.

ESP32-S3-DevKitM-1-N8 - WiFi + Bluetooth - mini development board with ESP32-S3-MINI-1/1U chip.

1. ESP32-S3-MINI-1/1U chip
2. 3.3 V LED - lights up when power is applied to the board
3. Addressable RGB LED
4. USB-UART bridge - provides up to 3 Mbps transfer rate
5. GPIO pinout
6. ESP32-S3 USB port - complies with USB 1.1 specification
7. RESET button
8. Boot button
9. USB-UART port
10. GPIO pinout
11. LDO power regulator from 5V to 3.3V

• Circuit: ESP32-S3-MINI-1/1U
• Chip: ESP32-S3FN8
• Processor: Dual-Core 32-bit Xtensa LX7
• Clock speed: up to 240 MHz
• Wireless communication: WiFi and Bluetooth
• WiFi Standard: IEEE 802.11 b/g/n (802.11n up to 150 Mbps)
• A-MPDU and A-MSDU aggregation
• Bandwidth: 2.412 GHz to 2.484 GHz
• Bluetooth Standard: LE 5 Mesh
• SRAM: 512 kB (including 16 kB in RTC memory)
• ROM memory: 384 kB
• SPI Flash memory: 8 MB
• Quartz oscillator: 40 MHz
• Interface: 45x GPIO, 4x SPI, 3x UART, 2x I2C, 14x Touch, 2x ADC, 1x LCD, DVP

Pinout.

• User guide
• Technical Documentation ESP32-S3
• Technical Documentation ESP32-S3-MINI-1 & ESP32-S3-MINI-1U
• ESP32-S3-DevKitM-1 schematic diagram
• PCB layout of the ESP32-S3-DevKitM-1
• ESP32-S3-DevKitM-1 Module Dimensions