Характеристики
Протоколы
- Communication
- RF
Прочие свойства
- Бренд
- Elektrobim
Свойства
- Каналы
- 4
- Подключение
- Radio
Описание
The radio receiver equipped with relays enables control of 4 devices operating at250 V ACviaNO/NCrelay outputs. The receiver communicates with a frequency of433.92 MHz. There are 2 remote controls included in the set, thanks to which it is possible to control the relay outputs of the module withina range of 100 m. Remotes may differ in appearance, they are sent randomly.
The relays operate with a voltage of12 or 24 V DC.
The appearance of the remotes may differ, the supplier sends different models. The different models of remote controls work the same.
The connectors in the table are described from above in the order they appear on the controller module. Details can be found in the module manual.
Name Description+
Power supply connector, 12 or 24 V supply voltage.-
The weight of the system.NO_4
The contact leads of normally open relay K4.COM_4
Thecontact ofthecommonrelay K4.NC_4
Contact output of normally closed relay K4.NO_3
Contact points normallyopenK3 relay.COM_3
Common interfaceK3 relay.NC_3
Contact exitnormally closedK3 relay.NO_2
Contact points normallyopenK2 relay. COM_2 Common interfaceK2 relay. NC_2 Contact exitnormally closedK2 relay. Example of using 12 / 24V DC remote controller - 433.92 MHz - 4 channel The kit includes:- 4-channel receiver
- Remote control - 2 pieces
Remotes may differ in appearance, they are sent randomly.
12 / 24 V DC remote control specification - 433.92 MHz - 4 channel- Power supply voltage: 12 / 24 V DC
- Relay operating voltage: 250 V AC
- Maximum load: 10 A
- Memory: up to 50 pilots
- Receiver sensitivity: -100 dBm
- Realistic range in the open field: up to 100 m
- Quartz stabilisation
- 4 relay outputs
- 3 modes of operation:
- bistable
- monostable
- change of state
- Can be used as an additional gate machine receiver
- Operating temperature: -20°C to 60°C
- Dimensions: 57.5 x 40.5 x 17 mm
- Operating instructions