Display OLED blue graphic 1.3'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 10451

Description

OLED blue display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, works with voltages of 3.3 V and 5 V, communication via SPI or I2C.

 

This version has soldered straight goldpin connectors. In our offer you will also findthe display with angled connectors.

 

The manufacturer provides auser manualandlibrary to support the screen.

 

Connection

The module has soldered angled goldpin connectors - raster 2.54 mm, communicates via SPI or I2C. Description of the specific pins is shown in the table.

 

Pin Symbol Description 1 VCC Supply voltage from 3.3 V to 5.0 V. 2 GND The ground of the system. 3 NC Should be left unconnected. 4 DIN Data line of SPI interface. 5 CLK Clock line of the SPI interface. 6 CS Select the device SPI bus is activated by low state. 7 D/C

Select operating mode - low means the transmission of commands,

high means transmission of data.

8 RES Reset system is activated by the low state.

 

Setting

The bus selection is carried out with jumpers BS0 and BS1, which are on the back of the board. By default the display is in 4-wire SPI mode. For details, see the table below.

 

Mode

work

Pin

BS0

Pin

BS1

Function

DIN

Function

CCS

3-wire SPI 1 0 MOSI SCLK 4-wire SPI 0 0 I2C 0 1 SDA SC

Jumper for selection of operation mode is located in the centre of the module: BS1 and BS0.

 

The product is compatible with Arduino

Online you can findlibrariesfor users ofArduino.

 

Specification

• Working voltage: from 3.3 V to 5.0 V
• Driver: SH1106 (documentation)
• Communication: SPI / I2C
• Mode selection using jumper BS0 and BS1
• Display type: OLED
• Diagonal: 1,3"
• Resolution: 128 x 64 px
• Color: blue
• The viewing angle of above 160 °
• Operating temperature: -20 °C to 70 °C
• Soldered goldpin connectors - 2.54 mm raster
• Dimensions: 40.5 x 37.5 mm

 

Useful links

• The website of the manufacturer: Waveshare
• User guide PDF
• The manufacturer's manual Wiki
• Library for Arduino
• Diagram of the module
• Library for display
• System documentation SH1106