Digital distance sensor 150cm - Waveshare 9524
- Артикул:
- 49447136
Характеристики
- Напряжение от
- 5.0 V
Общие характеристики
- Напряжение до
- 2.5 V
- Датчик - расстояние от
- 0 cm
- Датчик - расстояние до
- 150 см
Порты и интерфейсы
- Подключение
- Digital I / O
Прочие свойства
- Бренд
- waveshare
Описание
Digital distance sensor which serves to detect obstacles. The transmitter generates the modulated wave with a frequency of 180 kHz, the receiver captures the reflected light. The module operates with voltage from 2.5 V to 5 V. It has a digital output, making it compatible with most commissioning modules, includingRaspberry PiandArduino. The maximum range of the sensor is 150 cm.
Module contains the connecting wires with the female tips
The product is compatible with Arduino
The manufacturer has prepared a user guide along witha sample program for Arduino and STM32.
ConnectionThe device has three pins with soldered goldpin connectors - pitch of 2.54 mm.
Pin Description VCC Supply voltage: from 2.5 V to 5 V. GND The ground of the system. DOUT The digital output signal. The high status indicates the detection of an object within a given range. Specification- Supply voltage: from 2.5 V to 5 V
- 1 x digital output DOUT
- Measurement distance:
- effective: 0.8 m
- maximum: 150 cm
- The wavelength of the emitted light: 650 nm
- The wavelength of the received light: from 650 to 950 nm
- Based on the system PT1301
- Two status LEDs that signal the power supply and the detection of precipitate
- Dimensions: 53 x 18 mm
Attention!
When operating the sensor, you must be very careful not to direct the laser beam towards eyes.
Useful links- The website of the manufacturer of Waveshare
- User manual
- Diagram of the module
- Sample program of Arduino and STM32
- Software
