Water generator 5V - 1/2''

Watergenerator with an output voltage of 5.0 V at a flow rate of 4/min. The threads are 1/2," works with a pressure up to 1.0 MPa. Maximum output current is 150 mA.

Water turbine, which supplies Arduino with 5 V. To generate a stable voltage of 5 V, the flow rate must be 4 l/min.

Example turbine connection diagram.

• Working pressure: from o to 1 MPa
• Tested pressure: up to 0.6 MPa
• Flow range: from 2,5 to 20 L/min - pressure 0,05 - 0,2 MPa
• Output voltage: DC 5 V
• Output current: 0 to 150 mA
• Minimum voltage to start flow: DC 2.5 V Flow rate: 3.5 L/min
• Temperature range: from 0 to 80 °C - maximum ambient temperature can be 100 °C but not longer than 30 min
• Storage temperature: from -25 °C to 65 °C
• Battery not included

• Manufacturer's website: DFRobot - SEN0229
• Dimensions