DFRobot Mega D3 KIT - complex educational set with DFRDuino Mega 2560

Product description: DFRobot Mega D3 Kit - a comprehensive educational kit with DFRDuino Mega 2560

The kit contains the DFRduino Mega 2560 base board (compatible with Arduino Mega 2560) along with a set of components that demonstrate the capabilities of this richly featured platform. Simple language and friendly Arduino environment allows both beginners and advanced users to create software.

Included is a DFRduino Mega compatible Shield with room to create your own prototype circuits. All modules and sensors are grouped in pouches and described with clear labels.

The whole is enclosed in an aesthetically pleasing and practical plastic organizer, which makes the kit easy to carry.

Mega D3 Kit consists of: L.p. Picture Description 1 DFRduino Mega 2560- Module with Atmega 2560 microcontroller, fully compatible with Arduino Mega. 2 DFRobot Mega Expansion Shield V2.4 - has, among other things, a prototyping space, connectors for connecting sensors and a microSD card slot. 3 2x16 displaywith I2C converter - allows to display characters, only two data lines SDA and SCL are required to operate. 4 Module with relay - to control devices with high power consumption. 5 Temperature sensor LM35 - module with analog temperature sensor operating in the range from 0 to 100 °C. 6 Analogue light intensity sensor - operating in the range from 1 Lux to 6000 Lux. 7 Digital vibration sensor - module for detecting vibrations and oscillations. 8 Tilt sensor - a sensor that signals tilt through a digital or analog signal. 9 Push-button module. 10 Touch module - a board with a button that reacts to the touch of a human finger. 11 Module with red LED. 12 White LED module. 13 Blue LED module. 14 Buzzer module - a simple sound generator. 15 Digital magnetic field sensor - a module that detects the presence of a magnetic field in its environment. 16 Analogue sound sensor - allows detection of volume level or clapping type sounds. 17 Rotary encoder module - a knob that allows you to create a simple user interface. 18 Joystick module - a circuit to create a simple user interface. 19 Flame sensor - the sensor detects a light wavelength of 760 to 1100 nm, has a digital and analogue output. 20 Infrared transmitter - module with IR diode, transmitting a modulated signal of 38 kHz. 21 Light disc - round module with seven RGB LEDs that can emit light in any colour. 22 Infrared remote control kit - includes a remotecontrol, i.e. a transmitter and a receiver module. 23 DFRduino Ethernet Shield - overlay to connect Arduino to Ethernet network. 24 Three-axis accelerometer MMA7361 - sensor allows to measure acceleration in three axes: X, Y, Z. 25 Ultrasonic distance sensor URM37 - sensor operates in the range from 5 cm to 500 cm with temperature correction of 1 cm resolution. 26 Digital motion sensor - PIR type sensor with digital output. 27 Adjustable digital distance sensor - measuring range from 3 to 80 cm, set by a knob. Powered by 5 V. 28 MQ-5 gas sensor - detects the concentration of airborne gases, e.g. LPG. It has analogue output. 29 Small modeling servo - micro 9g type. 30 2 angle motors with gearbox - powered at 6 V with current consumption of 170 mA (up to 2.8 A with shaft locked). They have a rotational speed of 180 rpm and a torque of approx. 0.8 kg*cm. 31 DFRobot Motor Shield for Arduino - Overlay for Arduino allowing to control two DC motors (35V/2A). 32 Humidity sensor. 33 Soil Moisture Sensor - A sensor with an analog output used to determine soil moisture levels. 34 LSM303 3-axis Digital Accelerometer + Magnetometer - sensor for determining acceleration and magnetic field, communicates via I2C. 35 USB cable for programming the main board.

Each module contains a set of wires that allow to connect it to Arduino via included Expansion Shield.

Descriptions of how to connect the modules can be found on the manufacturer's pages linked above.

DFRobot Mega D3 Kit - comprehensive educational kit with DFRDuino Mega 2560

DFRobot Mega D3 Kit is an Arduino compatible educational kit, designed especially for people who already have some experience in creating projects with Arduino. It is a friendly environment with a simple language that is easy to learn.

The DFRobot Mega D3 Kit is based on the DFRobot Mega 2560 base board, compatible with Arduino Mega 2560. It is equipped with 30 electronic components, with the help of which you can deepen your practical knowledge of programming in the popular Arduino environment.

Contents of DFRobot Mega D3 Kit educational kit

DFRobot Mega D3 Kit consists of 30 elements and is enclosed in a practical organizer, which allows for safe storage and transport of the elements. Among them, apart from the base plate, there is a DFRduino Mega Shield, containing a place for creating your own prototypes.

Other elements include sensors collecting information from the environment (e.g. temperature, light intensity, vibration, tilt), LED modules, infrared transmitter and many others.

Useful links

• Manufacturer's website: DFRobot KIT0013