Device for washing and curing prints - Anycubic Wash & Cure 3 Plus
- Артикул:
- 121893850
Характеристики
Прочие свойства
- Бренд
- Anycubic
Описание
Another model of devices from Anycubic intended for the final processing of 3D prints made of photosensitive resin . The device has a large capacity of 7.6 L. It allows you to wash prints in two ways - using a dedicated basket or in hanging mode, without removing them from the work platform. Wash & Cure 3 Plus is distinguished by an additional source of UV light in the form of a flexible Flexicure lamp , which significantly improves the curing effect. Advanced features such as adjustable UV lighting time and intensity ensure effective and even light distribution on the print.
Device for washing and drying prints - Anycubic Wash & Cure 3 Plus.
The double platform expands the capabilities of the device.
The Wash & Cure 3 Plus device has an exceptionally large capacity, allowing you to wash and harden larger 3D models. Additionally, it has a two-level platform, so it can also process many smaller models at the same time. This reduces the operating time of the device, which allows you to save IPA alcohol and electricity. This feature is especially beneficial for users who work on large projects, providing them with greater flexibility and efficiency in the post-production process .
The flexible Flexicure lamp used is the so-called "gooseneck" increases the energy value by 30,000 uW/cm² in the exposure range of 1 - 3 cm. The arrangement of UV light-emitting diodes has also changed. Compared to previous Wash & Cure models, curing accuracy and consistency has increased by 20% .
Wash & Cure 3 Plus ensures effective hardening of prints.
The device offers large capacity in both modes.
The device offers two methods of washing 3D prints. The model can be placed directly in a special basket . Compared to previous models, Wash & Cure 3 Plus uses a basket made of PP material, so it is not exposed to corrosion. The second method is to mount the entire printing surface on a special holder . The print is then washed without having to be removed from the platform.
Wash & Cure 3 Plus is distinguished by an intuitive touch screen that makes it easier for users to control the washing and hardening processes of 3D prints. This makes working with him pleasant and effective. The tight design and optimized software reduce the noise produced during device operation, creating a quieter and more comfortable environment. According to research, the noise during operation of Wash & Cure 3 Plus does not exceed 65 dB .
The device is easy to use and has an intuitive interface.
The high-quality cover ensures the user's safety.
The top cover has been specially designed to prevent UV radiation from escaping the device's working area. The UV light blocking rate is over 99.95% .
- 1x Anycubic Wash & Cure 3 Plus
- 1x washing container
- 1x washing basket
- 1x Flexicure lamp
- 1x Allen key set
- 4x stand bar
- 1x curing platform
- 1x user manual
- 1x power supply
Set contents.
Effects of Wash & Cure 3 Plus.
- Working area of the washing function (in the basket): 228 x 128 x 260 mm
- Working area of the washing function (with platform): 228 x 128 x 250 mm
- Working area of the hardening function: φ220 x 260 mm
- UV light source: 14 405 nm lenses + Flexicure lamp
- Washing and drying time for prints: from 1 to 30 minutes
- Rated Power: 36W
- Dimensions: 312 x 267 x 434 mm
- Weight: 5.7 kg
- Manufacturer's website
- User manual