CTX 51 5L wall cleaner

Detergent cleaner developed to eliminate calcareous incrustations, organic residues and mineral sediments formed in the pool surface. Features: - Removes dirt, metal, and lime from the pool surface Instruction For Use: - General cleaning of the empty pool. - Ensure the pool is drained. Do not dilute the product before applying directly onto surfaces that need cleaning. - Leave the product for approximately half an hour, and then rinse with plenty of water. If the scale persists the treatment must be repeated. - In parts where the incrustations are very dense the action of the product can be helped by scrubbing with a brush. - Apply the product with spray that does not form a mist or with a watering can. - Cleaning of the filters. - This treatment is only for sand filters. - Empty the water from the interior of the filter completely. - Open the filter and pour in the product making sure the product is covering the filtering load. - Allow the product to react for approximately half an hour. - Close the filter and then proceed with an intense wash. Recommendations: - Before cleaning the inside of the pool, its surfaces (floor, tiles, ceramic tiles, etc.) must be well dampened with water. - After cleaning with the product the surfaces should be rinsed with plenty of water to remove all traces of the product. - If cleaning is carried out in the open air, avoid working in direct sunlight and ensure that the product is not allowed to dry. - When the pool is first being cleaned it is recommended that the product be used in its undiluted form. Dosage: - Add 20 liters of product for every 100m3 of water. - These doses are the ones suggested and can be modified according to the own characteristics of every swimming pool, climate, etc.