CGM 363A Shot Mono full face helmet

The 363 SHOT is CGM´s response to the motorcyclist who aims to a race-oriented helmet. The outer shell and the innovative rear spoiler have been designed to maximize the aerodynamic efficiency at high speed. It is realized in two measures of outer shell, with an inner helmet thermoregulation system, it´s composed by three channelings areas which guarantees a continuous air flow. The external visor, predisposed for Pinlock 70, is tilting and for a perfect adherence to the double perimeter seals, along with the lock in closed position, it ensures quietness and driving comfort. The 363 is also equipped with hidden sunvisor. The linings compartment is composed by hexagonal thermoformed top, ExtraCool linings, high visibility bands, nose and chin deflector and SOS Release System which allows a quick release of the cheek pads in case of emergency. Features: External Shell: - To realize models in different sizes of external shell allows to give a fit and a very good comfort fitting for all the sizes. The shell of reduced dimensions is useful to cover the smaller sizes, on the contrary the shell of bigger dimensions allows to cover the bigger sizes. A shell specially realized for some sizes allows to avoid an excessive encumbrance when the helmet is worn on. Shell In Hpt: - The shell is printed by injection, the thermoplastic polymers, once cold and hardened after the printing process, grant a high mechanic resistance for the maximum protection from impacts, in a wide range of temperatures, and a high capacity to dissipate the energy deriving from an impact. Moreover, the printed shell keeps its original structure, without deformations or instability for many years. Antiscratch Painting: - Each Helmet of ours is carefully treated to obtain the desired finishing. The shell, after having been smoothed, is painted with various layers of colour and then coated with the antiscratch transparent painting. Or, in the case of decals, it is first covered by the special water decal with the desired design, and then coated with the antiscratch transparent painting. The air system AIR STREAM SYSTEM is composed by front air vents , air ducts in the inner shell and rear air vents. The fresh air enters in the front air vents of the helmet and, passing through the proper ducting in the inner shell, it arrives to the rider. The air circle is generated exploiting the movement which generates a negative pressure and push the internal hot air towards the rear side of the helmet from where it comes out through the rear air vents. In this way the rider benefits of a costant air recycle inside the helmet which always grants a pleasant temperature. Long Visor With Antiscratch Treatment: - Visor with regular shape which usually covers also the nose. Treated to resist to surface scratches. Quick Release Visor: - Quick release visor, easily and fast to remove without the use of tools. Visor Lock In Closed Position: - The visor is equipped with a specific lock mechanism which allows to firmly lock it in position when closed. Tilting Visor: - Pivoted visor fixing system push the visor when closed on the gasket garanting an optimal adherence. Hidden Sun Inner Visor: - The darken hidden inner visor acts as a sunscreen handy and easy to use. It is enough to lift it down to use it or to lift it up to exclude it from the visual field and go back to a traditional visual. Removable Inner Lining: - The removable inner lining are fixed to the inner shell with fasteners, mechanisms in hard plastic or velcro, they can be washed with mild soap. Removable Cheek Pads: - The removable cheek pads are fixed to the inner shell with fasteners, mechanisms in hard plastic or velcro, they can be washed with mild soap Thermoformed Inner Lining: - The prestige inner lining is made with a thermoformed top for superior fit comfort. Extracool Inner Lining: - The EXTRACOOL linings are realized with a new fabric with an innovative design, it is breathable and antibacterial and extremely soft on skin. High Visibility Inner Lining: - The high visibility inner linings are made with inserts or bands in reflective material or in fluo colours to make the helmet more visible, increasing passive safety. Chin Deflector: - The chin deflector is a protection in fabric put just below the chin which prevents the air inlet inside the helmet increasing silence and stability. Nose Deflector: - The nose deflector, easy removable, is useful to direct the hot air breathed downwards to avoid the visor mist. Retention System: - The retention system with micrometric buckle or metal micrometric buckle, for the chin strap closing, is made of a button body and by a graduated lath which allow a quick and easy adjustment together with a practical release. The micrometric buckle is studied to obtain, with the same device, a quick and safe system of opening/closing and a handy and intuitive adjustment system. Elastic Strap Loop: - Elasticated fabric loop that allows you to lock the excess strap in the folded position. Prepared For Glasses Use: - The internal padding is made with a special housing for the temples of the glasses, this system is designed to offer optimal comfort to those who wear glasses. Intercom Set Up: - It indicates that the helmet is ready to lodge intercoms and aftermarket Bluetooth devices without the need of tools and without compromising the safety of the product. Pinlock Prepared: - The visor includes specific pegs for inserting the Lens Pinlock® against the fogging of the visor which could happen due to the breath and to the difference of inner temperature and external temperature of the helmet. Pinlock® has developed for CGM a unique Lens Pinlock® 70 (DKS002) available in different colorings for different kind of weather conditions. Sos Release System: - The SOS RELEASE SYSTEM allows to quickly remove the cheek pads, in an emergency, while the helmet is worn. By pulling the emergency red strips, the pressure buttons will release and the cheek pads extraction from the lower part of the helmet will be possible. This system must be used only in case of emergency. Pinlock Prepared | Hidden Sun Inner Visor: - The visor includes specific pegs for inserting the Lens Pinlock® against the fogging of the visor which could happen due to the breath and to the difference of inner temperature and external temperature of the helmet. Pinlock® has developed for CGM a unique Lens Pinlock® 70 (DKS002) available in different colorings for different kind of weather conditions. The darken hidden inner visor acts as a sunscreen handy and easy to use. It is enough to lift it down to use it or to lift it up to exclude it from the visual field and go back to a traditional visual. Visors And Pinlock Lens: - Various possibilities of visor colouring and Pinlock lens to offer you a complete choice of sun protection and to choose the chromatic match that you prefer. Air Stream System: - The ventilation system AIR STREAM SYSTEM is made by resealable front air vents, air ducts inside the inner shell and rear extractor. The fresh air comes in from the front air vent of the helmet and, by coming through the apposite channeling, goes right to the pilot. The air circulation is generated by the exploitation of the movement that creates a negative pressure and push the inner hot air towards the rear part of the helmet, here the hot air comes out from the rear vents. In this way the pilot benefits from a constant air recycle that always guarantees a comfortable temperature. Visor Lock In Closed Position: - The 363 helmet is equipped with an innovative visor lock system that allows you to keep perfectly sealedthe visor while driving. The release is easily done by a dedicated button. Specifications: - Weight: 1550 +/- 50GR