CERAMICSPEED PF4130 Gravel Coated Bottom Bracket Cups

PF4130 Bottom Bracket Gravel: The PF4130 bottom bracket is Press Fit into 41mm diameter shells that are 86.5mm wide and mate most cranks with a 30mm spindle to that standard. If you have a BB86 frame and want to install a 386EVO crank or Rotor 30mm crank, this is the kit you need. Our Gravel bottom brackets are built with CeramicSpeed Coated bearings and equipped with UFO Long Life Grease for the ultimate in durability and protection in all environments. CeramicSpeed bearings are installed in cups. The cups come with CeramicSpeed Bearings installed, coated bearings and hardened-steel races for longer life and less bearing drag. In The Box: - 2 cups with bearings installed. - 2 1mm spacers. - 2 0.5mm spacers. - 2 dust covers. - O-ring. - Plastic cable protector. - CeramicSpeed Long Life Grease. - Sticker sheet. Technical Data: - Enjoying the benefit of a massive, strong, and light 30mm crank spindle in your BB86 frame is possible with this kit. Press in the cups, set up the wave washer, add spacers if necessary, and torque down. - Our CeramicSpeed Coated Bearings reduce drag by over 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races, coated with a unique non-corrosive surface finish and combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition, in addition to lasting longer. Installation of PF4130 Bottom Bracket Gravel : If you don´t have any experience installing bottom brackets and bearings, we recommend that you have your local bike shop fit your new bearings. Maintenance of CeramicSpeed Bottom Bracket: We recommend that you follow our instructions on how to maintain your CeramicSpeed Bottom Brackets to achieve the lowest friction and the best longevity.