Ready to Go with Raspberry Pi Pico - set of 13 modules, sample programs + board

Product description: Ready to work with Raspberry Pi Pico - set of 13 modules, sample programs + board

Kit consisting ofRaspberry Pi Pico, sensors and modules. In the officialSDKfiles for C/C++ and Python you can findconnection examplesandready-made codesto start your adventure with programming and electronics based on the modules from the kit. The kit includes, among others: Raspberry Pi Pico, contact board, wire set, temperature and humidity sensor, pressure sensor, accelerometer, alphanumeric and OLED display and LED ring. Raspberry Pi Pico can also be programmed byRaspberry Pi 2B / 3B / 3B+ / 4B / Zero.

Ready to use kit with Raspberry Pi Pico and modules.

Raspberry Pi Pico

TheRaspberry Pi Picoboard is equipped with a dual-coreRP2040microprocessor based onARM Cortex M0+core clocked at 133 MHz. The module has 26 GPIO pins operating at3.3V. The Pico can be programmed inC/C++ or MicroPython. To power the controller you can use a microUSB connector or a cage with 3AA batteries.

Kit contents L.P. Picture Description 1 Raspberry Pi Picomodule with RP2040 microcontroller and 26 GPIO pins operating at 3.3V. The module has soldered goldpin connectors allowing it to be directly plugged into a contact board. 2 Contact board 830 fields- large board with separate power supply lines for creating electronic circuits. 3 Set of connection cables - male-female 20 cm- 40 cables allowing direct connection of the modules to the Raspberry Pi Pico board. 4 Male-to-male connectionwires - 65 pieces of male-to-male wires to connect the components on the contact board. 5 DHT11 temperature and humidity sensor- a module with a temperature and humidity sensor with a measurement range of 0°C to 50°C and 20% to 90% RH. 6 BME280 - 110 kPa I2C / SPI-temperature, humidity and pressuresensor communicating via I2C. Its measurement ranges are: from -40°C to 85°C, from 10% to 100% RH and from 300 hPa to 1100 hPa. 7

IMU 10DoF - MPU9255 + BMP280 - 3-axis accelerometer, gyroscope, magnetometer and barometer - sensor based on the MPU9255 chip with a gyroscope, accelerometer and compass

8 MPU-6050 3-axis accelerometer and gyroscope - module based on MPU-6050 chip with accelerometer and gyroscope, communicates via I2C interface. 9 LCD 16x2 display with converter- with blue backlight - popular alphanumeric display with soldered goldpin connectors. 10 OLED blue graphic display 0,96'' 128 x 64 px I2C- a display based on the SSH1106 chip with a diagonal of 0.96" and a resolution of 128 x 64 px. 11 RGB LED ring WS2812B 5050 x 16 diodes - 68 mm- module equipped with 16 LEDs arranged on a board of 68 mm diameter. 12 THT CF carbon 1/4 W 10 kΩ resistor - 30pcs.- Set of 30 resistors with a resistance of 10 kΩ. 13 MicroUSB B - A 2.0 black cable- 1.8m long cable to power and program the Raspberry Pi Pico. 14 PIR motion sensor HC-SR501- PIR motion sensor allows to detect motion in a range of 7m. 15 Bi-directional, 4-channel logic levelconverter- a converter that allows you to connect modules running on 5V to your Raspberry Pi Pico. 16 Organizer- a portable container that holds all the contents of the kit.

Useful links

• Manufacturer's website
• RP2040 Documentation
• Raspberry Pi Pico Documentation
• RP2040 project files
• Pico C SDK
• Pico Python SDK
• User Guide
• GitHub repository - Pico SDK
• GitHub repository - sample code
• MicroPython development environment - Thonny