Bigtreetech Octopus Pro V1.0.1 STM32F429ZE motherboard for 3D printers
Бестселлер
- Артикул:
- 57515021
43 967 AMD
Характеристики
Прочие свойства
- Бренд
- BIGTREETECH
Описание
Product Description: Bigtreetech Octopus Pro V1.0.1 STM32F429ZE Motherboard for 3D Printers
Powerful Bigtreetech Octopus Pro v1.0.1 motherboard based on a 32-bit STM32F429ZE ARM Cortex M4 microcontroller, with a clock speed of 168 MHz and 1 Mb of Flash memory. Octopus Pro supports as many as 8 stepper motor drivers, thanks to which it is able to control 8 different axes. The logic voltage of Bigtreetech Octopus Pro v1.0 is 5 V. It supports open-source software such as Marlin, Klipper, Raspberry Pi and Octoprint. The board is also equipped with, among others, a WiFi and BL-Touch interface.
Bigtreetech Octopus Pro V1.0.1 motherboard.
Kit contents.
Main features of Bigtreetech Octopus Pro V1.0.1
- Based on the efficient STM32F429ZE ARM Cortex M4.
- It is equipped with all the connectors necessary to connect the individual elements of the 3D printer .
- Supports up to 8 stepper drivers to control up to 8 different axes.
- Communication with motor controllers can take place via the SPI, UART, STEP / DIR interfaces.
- The logic voltage is 5 V.
- Supports motors with a voltage from 12 V to 60 V.
- Supports Bigtreetech touch screen and standard LCD12864, LCD2004, etc. displays.
- NTC1000K * 5 thermistor + MAX31865 chip.
- Has extension interfaces Fil-DET, PWR-DET, PS-ON, BL-Touch, etc.
- It supports open-source software such as: Marlin, Klipper, Raspberry Pi, and Octoprint.
- Built-in USB Type-C port and microSD card slot.
- Firmware update via SD card.
- The dimensions of the board are 160 x 100 mm.
- Bigtreetech Octopus Pro V1.0 motherboard
- USB type A - USB type C cable
- Jumpers
- Fuse
Technical Specifications
Microcontroller:
STM32F429ZE with ARM Cortex M4 core
Input voltage:
24 V DC
Logic voltage:
5 V
Supported software systemic:
Marlin, Klipper, Raspberry Pi and Octoprint
WiFI interface:
ESP8266
Fan interface:
6 x PWM controlled 2 x normal fans 3 x adjustable voltages (5V / 12V / 24V)
Extension interfaces:
SPI, UART, CAN BUS, I2C, LED RGB, Fil-DET, PWR-DET, PS-ON, BL-Touch, etc.
Supported stepper motor drivers:
DRV8825, A4988, etc.
Supported stepper driver interfaces: SPI, UART, STEP / DIR Engine controller sockets: MOTOR0, MOTOR1, MOTOR2, MOTOR3, MOTOR4, MOTOR5, MOTOR6, MOTOR7 Temperature sensor interfaces: THB, T0, T1, T2, T3 PC communication interfaces: USB Type-C Supported file formats: G-code Recommended software: Cura, Simplify3D, Pronterface, Repetier-host, Makerware
Useful links
- Manufacturer's website