Характеристики
Прочие свойства
- Бренд
- Barton Marine
Свойства
- Размер
- 6-7.6 m
Описание
With no tension on moinsheet or kicker, the rods will support the boom above horizontal level, allowing to ease out the sail if necessary when running in occasional gales.
Adjusting either moinsheet or kicker tackle will cause the rods to flex:
the Boomstrut is compressed, allowing mainsail to flatten or on the contrary to sail under full sail in light winds.
Operating principle:
The 2 fibreglass rods are designed to have enough back pressure to support the weight of both boom and mainsail.
Quality construction:
The Boomstrut comes in a complete kit ready to install and utilises your current kicking strap tackle.
Boomstrut kit features:
- 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.
- High quality Spectra anodised aluminium mast and boom fittings.
- Stainless steel fastenings.
No servicing requirements.
- Carefully constructed to eliminate sharp edges and save damage to sails.
- Lightweight, saves windage aloft.
Immediate smooth response.
No adjustments needed.
- No requirement for a topping lift.
it provides an additional mainsail halyard.
- Fits all types of mast and boom extrusions, and can be easily shorten by simple cutting with a fine-toothed hacksaw.
Adjusting either moinsheet or kicker tackle will cause the rods to flex:
the Boomstrut is compressed, allowing mainsail to flatten or on the contrary to sail under full sail in light winds.
Operating principle:
The 2 fibreglass rods are designed to have enough back pressure to support the weight of both boom and mainsail.
Quality construction:
The Boomstrut comes in a complete kit ready to install and utilises your current kicking strap tackle.
Boomstrut kit features:
- 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.
- High quality Spectra anodised aluminium mast and boom fittings.
- Stainless steel fastenings.
No servicing requirements.
- Carefully constructed to eliminate sharp edges and save damage to sails.
- Lightweight, saves windage aloft.
Immediate smooth response.
No adjustments needed.
- No requirement for a topping lift.
it provides an additional mainsail halyard.
- Fits all types of mast and boom extrusions, and can be easily shorten by simple cutting with a fine-toothed hacksaw.