Arduino Nano RP2040 Connect with headers - ABX00053
- Артикул:
- 44321109
Характеристики
- UC - I2C
- yes
- UC - USB
- microUSB
- UC - WiFi
- yes
- UC - UART
- yes
- UC - ядро
- 2. Dual Core
- UC - Вспышка
- 16 MB
- UC - частота
- 133 MHz
- Напряжение до
- 4.5 V
- UC - аналог в
- 8
- UC - Bluetooth
- yes
- Интерфейс UC - SPI
- yes
- UC - Микроконтроллер
- RP2040
- UC - Цифровые контакты
- 22
Вес и размеры
- Вес
- 0.7 кг
Общие характеристики
- UC - PWM
- 20
- UC - ядро
- Cortex-M0
- Напряжение от
- 21.0 V
Прочие свойства
- EAN
- 7630049203068
- Бренд
- Arduino
Описание
Another module from the seriesArduino NanoThis is the first Arduino board created in cooperation with Raspberry Pi. Arduino Nano RP2040 Connect module is based on chipRaspberry Pi RP2040and it's the first module which combines this chip with additional sensors and connectivity on one PCB. The board houses the aforementioned RP2040 chip, a6-axis sensor IMU, a U-Blox Nina chip forWiFi and Bluetoothcommunication, as well as a microphone and an RGB LED. The IMU chip hasmachine learningcapability, so additional sensing algorithms are available. The terminals of the Arduino Nano RP2040 Connect module operate at 3.3V. This version has soldered pins.
Arduino Nano RP2040 Connect board can be programmed via environmentArduino IDEoffline mode or inArduino IDE Cloudonline mode. Programming is done by connecting the board to computer using microUSB connector or by wireless connection using Arduino Cloud. The module is equipped with RP2040 chip with SPI, I2C, I2S, PIO, UART, PWM interfaces and digital and analog pins. There is also U-Blox chip on the board allowing wireless communication via WiFi and Bluetooth.
- Interfaces: USB, SPI, I2C, I2S, UART, PWM
- U-Blox Nina chip for WiFi / Bluetooth wireless communication
- MicroUSB connector for computer connection and 5V power supply
- Built-in microphone, RGB LED and 6-axis IMU
- Based on Raspberry Pi RP2040 microcontroller clocked at 133 MHz
- Built-in 16MB Flash memory and 264kB SRAM
- 20 PWM pins, 8 analog pins and 22 digital pins
- Standard dimensions for Nano series - 45 x 18 mm
Arduino Nano with Raspberry Pi RP2040 microcontroller.
- ARM Cortex M0 Dual-Core 133 MHz
- 264 kB SRAM
- 2 MB Flash
- DMA controller
- supports up to 16 MB Flash memory via QSPI bus
- programmable IO (PIO) to support external peripherals
- 4-channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
- SWD debugging
- dual core Xtensa LX6 240 MHz 32-bit
- 520 kB SARAM on-chip memory
- 448 kB ROM for boot and core functions
- 16 MB Flash memory for code storage, includes hardware encryption for program and data protection
- 1 kB EFUSE for MAC address, module configuration, Flash encryption and Chip-ID
- IEEE 802.11 b/g/n 2.4 GHz WiFi
- Bluetooth 4.2
- built-in antenna (PIFA)
- 4 x 12-bit ADC
- 3 x I2C, SDIO, CAN, QSPI
- AT25SF128A 16MB NOR Flash
- 532 Mb/s QSPI data transfer
- 100k programming / erase cycles
- 3D gyroscope:
- ± 2 / ± 4 / ± 8 / ± 16 g full scale
- 3D accelerometer:
- ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 dps full scale
- advanced pedometer, step detector and step counter
- Motion detection and roll detection
- standard interrupts: free fall, 6D/4D orientation wake-up, click, double click
- programmable finite state machine: accelerometer, gyroscope and external sensors
- machine learning core
- embedded temperature sensor
- AOP = 122.5 dBSPL
- signal to noise ratio 64 dB
- omnidirectional sensitivity
- frequency -26 dBFS ± 1 dB
- common anode
- connected to U-blox Nina W102 GPIO
- cryptographic coprocessor with secure hardware key storage
- I2C, SWI
- Hardware support for symmetric algorithms:
- SHA-256 and HMAC HASH including off-chip context saving/restoration
- AES-128: encryption/decryption, Galois Field Multiply da GCM
- internal high quality random number generator NIST SP 800-90A/B/C
- Secure boot support
- full ECDSA code signature validation, optional hash/signature
- Optional communication key disablement prior to secure boot
- Message encryption/authentication to prevent attacks
- 14 x digital pin
- 8 x analog pin
- microUSB
- UART, SPI, I2C, I2S, PIO
- Manufacturer's website: Arduino ABX00053
- Documentation ABX00053
- Documentation RP2040
- ArduinoIDE (Desktop)
- Arduino IDE (Cloud)
- User Guide - Cloud IDE
- Project Hub
- PDM Microphone Library
- WiFiNINA library
- ArduinoBLE library
- IMU library
