Arducam Pan Tilt Platform - 2 DOF platform for Raspberry Pi / Nvidia Jetson Nano / Xavier NX- Arducam B0283

Kit with 2 DOF control platform for Raspberry Pi / Nvidia Jetson Nano / Xavier NX camera. The platform works on the basis of two high-quality digital servos GH-S37D , which allow you to change the position of the camera in two positions - vertical and horizontal up to 180 ° . Moving the servos is possible thanks to a dedicated control board with a 12-bit PWM driver. Thanks to this, it is possible to observe places and objects that should be monitored from different angles by several cameras at once.

Arducam Pan Tilt Platform - 2 DOF platform for Raspberry Pi / Nvidia Jetson Nano / Xavier NX camera - Arducam B0283.

• Servomechanism
  • Type: digital
  • Model: GH-S37D
  • Number of servos in the platform: 2
  • Rotation angle:
    • vertically: 180 °
    • horizontal: 180 °
  • Torque:
    • 0.6 kg * cm at 3.6 V
    • 0.8 kg * cm at 4.8 V
  • Working speed:
    • 0.13 sec / 60 ° at 3.6V
    • 0.09 sec / 60 ° at 4.8 volts
  • Working voltage: 3.6 V to 4.8 V
  • Working current: about 350 mA
  • Dead Band: 3 usec
  • Platform dimensions: 20 x 8.75 x 22 mm
• PWM control board
  • PWM driver: PCA9685
  • PWM resolution: 12 bits
  • Communication interface: I2C
  • Working voltage: 3V to 5V
  • Dimensions: 38 x 28 mm

• IoT cameras
• Robot cameras
• Security and surveillance projects
• Projects using Raspberry Pi

• Digital servo - 2 pieces
• A set of improved bracket components
• PWM control board
• Female-female connection cables in various colors
• Mounting screws

Arducam Pan Tilt Platform Kit Contents.

• The website of the manufacturer: ArduCam B0283
• Assembly instruction