ArduCam OV2640 2MPx 1600x1200px 60fps camera module + lens LS-4011 M12x0.5
Бестселлер
- Артикул:
- 46852322
Нет в наличии
Характеристики
- Камера - матрица
- OV2640
- Камера - объектив
- M12x0.5
Камера
- Тип камеры
- module
Общие характеристики
- Формат камеры
- 1/2,7 '', 1/2,7 ''
Порты и интерфейсы
- Подключение
- GPIO
Прочие свойства
- EAN
- 5904422349790
- Бренд
- ArduCam
- Разрешение
- 1600x1200px
Описание
Description
Camera module with the matrixOV2640 2 MPx with a resolution of 1600 px x 1200 and speeds up to 60 frames per second. It features lens LS-4011 M12x0.5, with the following parameters: focal length of 4.9 mm, angle of 60 °, aperture of 1.2, the format of 1/4. The device operates with a voltage of 3.3 V and 5 V, it communicates through a parallel interface.
A detailed description can be found onthe manufacturer's website, it isalso available inthe library on GitHub.
Specification- Operating voltage: 1.7 V to 3.3 V
- Matrix OV2640 (documentation)
- Resolution: 1600 x 1200 Px (2 Mpx)
- The number of frames per second:
- up to 60 FRAMES per second for CIF format
- up to 30 FRAMES per second for SVGA format
- up to 15 FRAMES per second for the format SXGA / UXGA
- Sensitivity: 0,6 V/(lux*sec)
- Lens: LS-4011 (documentation)
- Focal length: 4.9 mm
- Aperture: 1,2
- Viewing angle: diagonal: 60 °
- Format: 1/4 "
- Output formats:
- YUV 422/420 / YCbCr 422
- RGB565/555
- compressed 8-bit data
- 8 / 10-bit RAW RGB Data
- Configuration of sensor through I2C bus
- The viewing angles of the camera with the lens:
- horizontal: 55 °
- vertical: 41 °
- diagonal: 69 °
The device has soldered 20-pin connector, pitch of 2.54 mm.
Pin Description VCC Supply voltage is 3.3 V. GND The ground of the system. SCL Clock line of the interface Two-Wire. SDATA Data line of the interface Two-Wire. VSYNC Vertical synchronization. HREF The output HREF. PCLK The clock output of the matrix's sensor. XCLK The input of the clock system. D9 The video data output - bit 9 (MSB). D8 The video data output - bit 8. D7 The video data output - bit 7. D6 The video data output - bit 6. D5 The video data output - bit 5. D4 The video data output - bit 4. D3 The video data output - bit 3. D2 The video data output - bit 2 (LSB). D1 The video data output - 1 bit (10-bit mode). D0 The video data output - bit 0 (mode of 10-bit). RESET The system's reset activated with low state. PWDN Disabling of the system activated by the high state.Useful links
- The website of the manufacturer ArduCam
- Examples of programs for Arduino
- ArduCam and Arduino - review of Forbot
- Technical documentation of sensor OV2640