ARAI QV-Pro full face helmet

The QV-PRO is nothing less than an ultimate sports-touring helmet. It features the advanced VAS technology of the also new RX-7V and even shares the same outer shell, but with different ventilation. This rounder, smoother and stronger shell with an intermediate oval fit offers the important glancing off properties needed for superior helmet performance at real world impacts. The QV-PRO features as the second model in line, the VAS (Variable Axis System) visor pivot system that offers a larger smoother and stronger outer shell area. From the very early start, the QV-PRO has been designed as the ultimate all-round helmet with the advanced technology of the RX-7V, but also answering to the demands of the very large segment of sports-touring riders. The QV-PRO comes standard with the PSS visor, the all-weather solution against fogging, misting and sun-glare. Features: QV-Pro: Optimized ventilation: - The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to the rider. Large ducts and vents feature massive inlet and exhaust openings, while the large switches can be easily operated, even with thick gloves. It is this advanced ventilation system that makes the QV-PRO perfect for those long rides in every weather. Peripherally Belted Complex Laminate Construction: - Arais proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, greatly increases shell strength and flexibility while maintaining low weight and a lower centre of gravity. Positioned across the top of the eye port, this band contributes to the use of a thinner EPS liner which greatly enhances the upward field of view. A specially designed mechanically expanded fibre mat, sandwiched between the inner and outer layers of Arais proprietary Super Fibre Laminates, is used to reinforce and bond these two Super Fibre layers without adding significant weight to the helmet. Variable Axis System (VAS): - With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS): - Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Dual intake: - Designed for increased airflow and lower noise level, guiding fresh, cool air into the interior. Front Ventilation: Brow vents extended to temple area: - Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent: - Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: One-piece rear exhaust: - Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts: - Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler: - Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Visor: VAS Max Vision Visor with De-Mist option: - VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system: - Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid one finger operation even with gloves. Visor: PRO Shade System: - Arai answer to the problem of sun glare and visor fogging. The PSS offers an efficient combination of an easy to flip up, lockable sun peak, the Max Vision visor and the efficient Pinlock inlay lens. PSS offers protection against sun glare, without effecting the integrity and strength of the helmet shell which could be caused by build-in sun visors. Available for both VAS and SAI visor system. Visor: Pinlock insert lens included: - Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner material: - The fully removable interiorliner system has been improved with new Anti-microbial Liner material, which helps maintain neutral acidity levels close to human skin and antibacterial consumption. With the aim of a softer, deeper and even more comfortable fit we developed a new softer liner frame material. The new liner also has adjustable temple padding that allows for a customized fit. Interior: Replaceable Cheek pads/Ear cups: - Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior: - Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Chinstrap covers: - Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll: - Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets: - Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS): - To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm Peel Away Ear cups/Cheek pads: - Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm Peel Away Temple pad: - Arai´s peel-away temple crown pads give the option of 5 mm more interior width* if needed. Interior: Thin centre pad for more room in front area: - The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Comfort: Emergency Release System (ERS): - Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Chin Curtain: - Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05: - The most common helmet certification internationally, required by over 50 countries worldwide. General: Five times inspected: - Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. General: Washable interior: - The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. General: Handmade: - It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. General: All-day comfort: - All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. General: Penetration tested; - All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. General: Double-D ring device: - The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. General: Smooth shape, better protection: - The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You dont want to decelerate your helmet more than necessary. Thats why all Arai vents and ducts are designed to break off during an impact. General: Hard outer shell, soft inner shell: - Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. General: Organic shape: - The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the heads natural shape for improved comfort, fit and to help minimize wind turbulence. General: Different outer shells: - Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. General: Arai In-house test: - This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.