65K RGB LCD IPS Display - 240x240px 1.54'' SPI - Waveshare 18079

IPS LCD displaymanufactured byWaveshareand equipped with ST7789 driver. The screen diagonal is1.54'' and the resolution is240 x 240 px. The module usesa 4-pin SPI interfaceto communicate with the controller module. It presents images in as many as 65 thousand colors of the RGB gamut. Despite the small size of the module, the displayed image is clear and legible.

LCD IPS 65K RGB display - 240 x 240 px 1,54'' SPI.

The display uses a 4-pin SPI communication interface.

• Type: LCD IPS
• Display diagonal: 1.54 mm
• Display resolution: 240 x 240 px
• Display colors: 65K RGB
• Communication interface: SPI bus (4-wire)
• Embedded controller: ST7789
• Compatible with controllers such as Raspberry Pi / Arduino / STM32
• Supply voltage: 3.3 V / 5 V
• Display size: 27.72 x 27.72 mm
• Pixel size: 0.1155 x 0.1155 mm
• Module dimensions: 50 x 35 mm

• IPS 65K RGB LCD display - 240 x 240 px 1,54'' SPI
• Grove 8-pin connection cable - 20 cm long

The displayhas two connection options - usingGrovestandard connectors or throughsolder fieldswith a 2.54 mm pitch. Each lead on the board has been described, so you will not have any problems with the proper connection. You should connect the display module with the controller according to the following dependencies:

• VCC - power supply pin 3.3 V or 5 V
• GND - system ground
• DIN - SPI interface data line input pin
• CLK - SPI clock input pin
• CS - Chip Select
• DC - data / command select pin (high state: data; low state: command)
• RST - RESET pin
• BL - pin responsible for backlight

Connection diagram using Raspberry Pi minicomputer, to be purchased separately.

• Manufacturer's website: Waveshare 18079
• Product Wiki page
• Technical Documentation ST7789VW
• Schematics of the module