64MPx Autofocus Camera Module for Raspberry Pi - ArduCam B0399

The ArduCam camera module is designed to work with Raspberry Pi minicomputers. The camera was based on a Sony sensor with a resolution of up to 64 MPx, 9152 x 6944 px . Equipped with manual and automatic focus , supports ePTZ with 10x digital zoom . The Pi Hawk-eye is compatible with the official Raspberry Pi V1 and V2 cameras. It connects to the minicomputer via the MIPI CSI-2 connector. It is compatible with libcamera software.

• 64 MPx - the first camera for Raspberry Pi offering parameters such as smartphones.
• Autofocus - the most versatile focus (automatic / manual / etc.).
• 10x zoom - Supports ePTZ for close-ups.
• Supports libcamera - native software compatibility with a format similar to V1 / V2 cameras.

• Optical format: 1 / 1.7 "
• Type of focus: manual / automatic
• Resolution: 64 MPx, 9152 x 6944 px
• Video mode (Raspberry Pi):
  • 1080p / 30 fps
  • 720p / 60 fps
  • 640 x 480p / 60/90 fps
• Video mode (camera module):
  • 1280 x 720 px / 120 fps
  • 1920 x 1080 px / 60 fps
  • 2312 x 1736 px / 30 fps
  • 3840 x 2160 px / 20 fps
  • 4624 x 3472 px / 10 fps
  • 9152 x 6944 px / 2.7 fps
• Color Filter: Quad Bayer Coding (QBC)
• Supported platforms (for 64 MPx resolution): Raspberry Pi 4B / CM4
• Supported platforms (for 16 MPx resolution): Raspberry Pi 2/3 / CM3 / Zero W / Zero 2 W
• Raspberry Pi OS: Bullseye (32-bit / 64-bit)
• Focus: 8 cm to infinity
• Focal ratio: F1.8
• Focal length: 5.1 mm
• Viewing angle: 84 °
• Shutter type: rolling
• Output format: JPEG / YUV / RGB / RAW10
• Dimensions: 25 x 24 mm

• 1x 64 MPx camera with autofocus for Raspberry Pi - ArduCam B0399
• 1x 15-pin FPC ribbon cable with a length of 15 cm

• Manufacturer's website
• User Guide
• Documentation
• Support for the Raspberry Pi camera from a smartphone
• How to use the ArduCam 64 MPx camera in Octopi
• How to use the ArduCam 64 MPx camera on a Raspberry Pi
• 3D drawing