3D Printer - Flashforge Creator 3 Pro - IDEX dual-extruder
- Артикул:
- 89459134
Характеристики
- Promotion
- BF20
- 3D - таблица temp.
- 120 °C
- 3D - тип распечатки
- FFF/FDM
- 3D - диаметр нити накала
- 1.75 mm
Общие характеристики
- 3D - hotend amount
- 2
- Толщина 3D - печати
- 0.05 - 0.4 mm
- 3D - точность печати
- 0,2 mm
- 3D - температура сопла
- 320 °C
- Поверхность для 3D - печати
- 300x250x200 mm
Прочие свойства
- EAN
- 6971940409984
- Бренд
- FLASHFORGE
Описание
3D printer with IDEX system, which is based on the use of two independent extruders. It allows you to form two 3D models at the same time in one of three available modes: duplicate, mirror and two-color printing. The dual extruder is also great for creating dissolvable supports. The working area of the device is 300 x 250 x 200 mm. Flashforge Creator 3 Pro has an enclosed housing. The overall dimensions of the printer are: 627 x 485 x 615 mm.
Setting up the dual extruder and filament can be done in the manufacturer's software FlashPrint5.
3D Printer - Flashforge Creator 3 Pro.
Fast nozzle warm-up and efficient cooling of 3D prints.
Flashforge Creator 3 Pro features powerful, self-contained extruders. The dual fan design provides efficient cooling of 3D prints. It takes just 1 minute to warm up the nozzle to an operating temperature of 200°C.
On the Creator 3 Pro, the nozzle and heating block are mounted together. This makes it easier to replace and maintain these printer components. The improved sensor used in the machine ensures a more accurate leveling of the work table.
Nozzle and sensor for easier leveling of the heating table.
Three print modes in Creator 3 Pro.
Flashforge Creator 3 Pro, thanks to its two independent IDEX extruders, allows you to print 3D models in three modes:
- Duplicate
- Mirror print
- Standard two-color printing
Two extruders running at the same time are also great for printing with supports, especially soluble ones.
The Creator 3 Pro can use high temperature nozzles (the maximum working temperature of this component is 320°C). The printer is compatible with stainless steel and carbon steel nozzles (recommended to work with carbon fiber filaments) with bore diameter: 0.4 mm, 0.6 mm, 0.8 mm. Nozzles are not included in the set.
Types of nozzles compatible with the printer. Not included.
Hotbed reaches a maximum operating temperature of 110°C in just 3 minutes.
Flashforge Creator 3 Pro offers a large working area of: 300 x 250 x 200 mm. The maximum working temperature of the hotbed is 120°C, which only takes about 3 minutes to reach. On the surface of the hotbed there is a flexible overlay, which ensures good heat conduction during printing and easy removal of the models afterwards.
Accessories included- Spool of PLA filament - 2 pcs.
- Power cord - 1 pc.
- Spatula for tearing off printouts - 1 pc.
- USB flash drive - 1 pc.
- PTFE tube - 1 pc.
- Pin to unlock the nozzle - 1 pc.
- Open end wrench - 1 pc.
- Screwdriver - 1 pc.
- Allen wrench - 1 pc.
- Grease packet - 1 pc.
- Glue stick - 1 pc.
- Manufacturer's website
- FlashPrint5 software